Difference between revisions of "Text commands"
(54 intermediate revisions by 5 users not shown) | |||
Line 2: | Line 2: | ||
<!-- Adopted to Stylesheet DL6RAI --> | <!-- Adopted to Stylesheet DL6RAI --> | ||
− | Text commands are a comfortable and fast way to access different functions of the Win-Test software. These commands have to be typed right into the callsign field. They will be executed after pressing ['''<tt>Enter</tt>''']. If the command was executed sucessfully, the command text will be deleted from the callsign field. | + | Text commands are a comfortable and fast way to access different functions of the Win-Test software. These commands have to be typed right into the callsign field of the [[Menu:Windows#Log_Entry_.28Main_window.29|Log entry window]]. They will be executed after pressing ['''<tt>Enter</tt>''']. If the command was executed sucessfully, the command text will be deleted from the callsign field. |
==Changing Bands or Jumping to a Frequency== | ==Changing Bands or Jumping to a Frequency== | ||
− | You can directly enter the band which you want to QSY | + | You can directly enter the band to which you want to QSY (if permitted for the current contest): '''<tt>160</tt>''', '''<tt>80</tt>''', '''<tt>40</tt>''', '''<tt>144</tt>''', '''<tt>432</tt>''', '''<tt>241G</tt>''', etc. |
− | + | For frequencies below 30 MHz, enter the wavelength in meters ('''<tt>80</tt>''' for 3.8 MHz, not '''<tt>75</tt>'''). For frequencies above 30 MHz and below 10 GHz, enter the frequency in MHz. Above (and including) 10 GHz, enter '''<tt>10G</tt>''' (or '''<tt>24G</tt>''', etc.). This behaviour may depend on the [[Menu:Tools#Data_Entry|Tools | Data Entry | Priority]] setting. | |
− | [ | ||
− | You can also directly type a frequency (in kHz): for example '''<tt>14234.4</tt>''', '''<tt>1843</tt>''', '''<tt>144300</tt>''' etc. If a radio is connected to your computer, it will jump to the desired frequency. You can also just enter the kHz part of the frequency of the current band ( | + | You can also directly type a frequency (in kHz): for example '''<tt>14234.4</tt>''', '''<tt>1843</tt>''', '''<tt>144300</tt>''', etc. If a radio is connected to your computer, it will jump to the desired frequency. You can also just enter the kHz part of the frequency of the current band (e.g. while on 20m, entering '''<tt>035.5</tt>''' will tune your radio on 14035.5). Finally, you can also enter the frequency by omitting the decimal point (CT style) (e.g. '''<tt>18404</tt>''' will tune your radio on 1840.4). |
− | Of course, all the Win-Test windows will be updated | + | Of course, all the Win-Test windows will be updated according to the new frequency or band. |
− | To | + | To return to your last CQ frequency, press '''<tt>[Alt-F4]</tt>'''. |
==Changing Mode== | ==Changing Mode== | ||
− | You can | + | You can directly change the operating mode by typing '''<tt>CW</tt>''', '''<tt>SSB</tt>''' etc. |
+ | The mode will be switched as soon as you press Enter. | ||
+ | |||
+ | There are also shortcuts for changing the mode: '''<tt>Ctrl-F1</tt>''' or '''<tt>Ctrl-F2</tt>''' will cycle through all the available modes. | ||
+ | |||
+ | Of course, the chosen mode will have to be compatible with the rules of the chosen contest, otherwise Win-Test will ignore this command (error detection in the field). | ||
==List of Text Commands== | ==List of Text Commands== | ||
− | These text commands | + | These text commands provide fast access to many of the functions listed in the Win-Test menus. Just type the text command in the callsign field, and press '''<tt>[Enter]</tt>'''. |
===CW Functions=== | ===CW Functions=== | ||
− | * '''<tt> | + | * '''<tt>BURSTS</tt>''': Enable CW speed bursts (controlled with ++/-- in macros), equivalent to <code>Options | CW | Speed Bursts enabled</code> |
− | + | * '''<tt>NOBURSTS</tt>''': Disable CW speed bursts (controlled with ++/(-- in macros), equivalent to <code>Options | CW | Speed Bursts disabled</code> | |
− | * '''<tt> | ||
− | |||
− | |||
− | |||
− | |||
* '''<tt>CORRECT</tt>''': Equivalent to <code>Options | CW | Correction | Enabled</code> | * '''<tt>CORRECT</tt>''': Equivalent to <code>Options | CW | Correction | Enabled</code> | ||
* '''<tt>NOCORRECT</tt>''': Equivalent to <code>Options | CW | Correction | Disabled</code> | * '''<tt>NOCORRECT</tt>''': Equivalent to <code>Options | CW | Correction | Disabled</code> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* '''<tt>CTSPACE</tt>''': Equivalent to <code>Options | CW | Shortened spaces (CT spaces) enabled</code> | * '''<tt>CTSPACE</tt>''': Equivalent to <code>Options | CW | Shortened spaces (CT spaces) enabled</code> | ||
* '''<tt>NOCTSPACE</tt>''': Equivalent to <code>Options | CW | Shortened spaces (CT spaces) disabled</code> | * '''<tt>NOCTSPACE</tt>''': Equivalent to <code>Options | CW | Shortened spaces (CT spaces) disabled</code> | ||
+ | * '''<tt>CUTON</tt>''': Enable cut numbers translation | ||
+ | * '''<tt>CUTOFF</tt>''': Disable cut numbers translation | ||
* '''<tt>CWAUTO</tt>''': Enable CW Auto Sending Mode | * '''<tt>CWAUTO</tt>''': Enable CW Auto Sending Mode | ||
+ | * '''<tt>CWAUTO3</tt>''': Start CW Auto Sending after 3 characters in the callsign field | ||
+ | * '''<tt>CWAUTO4</tt>''': Start CW Auto Sending after 4 characters in the callsign field | ||
* '''<tt>CWAUTOOFF</tt>''' (or '''<tt>NOCWAUTO</tt>'''): Disable CW Auto Sending Mode | * '''<tt>CWAUTOOFF</tt>''' (or '''<tt>NOCWAUTO</tt>'''): Disable CW Auto Sending Mode | ||
− | * '''<tt> | + | * '''<tt>CWFULLABBREV</tt>''' (or '''<tt>FULLABBREV</tt>'''): Equivalent to <code>Options | CW | Serial number | Abbreviated</code> |
− | * '''<tt> | + | * '''<tt>CWPROABBREV</tt>''' (or '''<tt>PROABBREV</tt>'''): Equivalent to <code>Options | CW | Serial number | Pro</code> |
+ | * '''<tt>CWSEMIABBREV</tt>''' (or '''<tt>SEMIABBREV</tt>'''): Equivalent to <code>Options | CW | Serial number | Half abbreviated</code> | ||
+ | * '''<tt>NOCWABBREV</tt>''' (or '''<tt>NOABBREV</tt>'''): Equivalent to <code>Options | CW | Serial number | Not abbreviated</code> | ||
+ | * '''<tt>ESM</tt>''' (or '''<tt>NOESM</tt>'''): Enable/disable Enter Sends Message Mode; equivalent to <code>Tools | Data Entry | Enable ESM [checked]</code> | ||
+ | * '''<tt>LEADINGZEROS</tt>''' (or '''<tt>LZ</tt>'''): Equivalent to <code>Options | CW | Serial number | Leading zeros [checked]</code> | ||
+ | * '''<tt>NOLEADINGZEROS</tt>''' (or '''<tt>NOLZ</tt>'''): Equivalent to <code>Options | CW | Serial number | Leading zeros [unchecked]</code> | ||
+ | * '''<tt>MESSAGES</tt>''' (or '''<tt>MSGS</tt>'''): Equivalent to <code>Options | CW | Modify standard messages...</code> | ||
+ | * '''<tt>REPEAT</tt>''' (or '''<tt>RPT</tt>'''): Equivalent to <code>Options | Automatic CQ repeat mode [checked]</code> | ||
+ | * '''<tt>RPTDELAY</tt>''': Equivalent to Tools / Automatic CQ repeat, with the focus set to the repeat interval field | ||
+ | * '''<tt>NOREPEAT</tt>''' (or '''<tt>NORPT</tt>'''): Equivalent to <code>Options | Automatic CQ repeat mode [unchecked]</code> | ||
+ | * '''<tt>SMARTCORRECT</tt>''' (or '''<tt>SMART</tt>'''): Equivalent to <code>Options | CW | Correction | Smart Correction enabled</code> | ||
+ | * '''<tt>NOSMARTCORREC</tt>''' (or '''<tt>NOSMART</tt>'''): Equivalent to <code>Options | CW | Correction | Smart Correction disabled</code> | ||
+ | * '''<tt>SOUND</tt>''': Equivalent to <code>Options | CW | No sound [unchecked]</code> | ||
+ | * '''<tt>NOSOUND</tt>''': Equivalent to <code>Options | CW | No sound [checked]</code> | ||
+ | * '''<tt>SPEED</tt>''' (or '''<tt>CWSPEED</tt>''') Equivalent to <code>Commands | CW speed</code> | ||
* '''<tt>TUNE</tt>''': Equivalent to <code>Commands | Carrier</code> | * '''<tt>TUNE</tt>''': Equivalent to <code>Commands | Carrier</code> | ||
− | * '''<tt> | + | * '''<tt>VARIABLES</tt>''': Equivalent to <code>Options | CW | Custom variables...</code> |
+ | * '''<tt>WEIGHT</tt>''' (or '''<tt>CWWEIGHT</tt>'''): Equivalent to <code>Commands | CW weight</code> | ||
+ | * '''<tt>WORKDUPE</tt>''' (or '''<tt>WORKDUPEON</tt>'''): Equivalent to <code>Options | CW | Work dupes</code> (checked). The normal exchange will be sent to all dupes; the $QSOB4 message variable will be ignored. | ||
+ | * '''<tt>NOWORKDUPE</tt>''' (or '''<tt>WORKDUPEOFF</tt>'''): Equivalent to <code>Options | CW | Work dupes</code> (unchecked). Causes the '''$QSOB4''' message to be sent to all dupes instead of the exchange, for example, when the [Insert] key is programmed as '''$LOGGEDCALL $QSOB4 $GUESSEXCH $F2''' | ||
===Voice Keyer Control Functions=== | ===Voice Keyer Control Functions=== | ||
Line 55: | Line 68: | ||
===Multi Operating=== | ===Multi Operating=== | ||
− | * '''<tt> | + | * '''<tt>BRIDGEHEAD</tt>''': Make the current station a [[Networking#The_Bridgehead_Concept|Bridgehead]] station |
+ | * '''<tt>INVENTORY</tt>''' (or '''<tt>INV</tt>'''): Requests all connected Stations to send their version number and status information. | ||
+ | ** [[Menu:File_new#Network_Parameters|Time Master]] stations are indicated by a capital '''M''' character (else '''m''') | ||
+ | ** [[Networking#The_Bridgehead_Concept|Bridgeheads]] by the capital character '''B''' (else '''b''') | ||
+ | ** stations which have enabled [[Menu:Options#Disable_log_synchronization_on_network|log synching]] are marked with a capital '''S''', while '''s''' means log sync is disabled | ||
+ | * '''<tt>MOVEINMYLOG</tt>''': Equivalent to tag <code>Edit | Move in my log only</code> | ||
* '''<tt>MULT</tt>''': Equivalent to <code>Commands | Station type | Mult</code> | * '''<tt>MULT</tt>''': Equivalent to <code>Commands | Station type | Mult</code> | ||
+ | * '''<tt>NOBRIDGEHEAD</tt>''': Make the current station a non [[Networking#The_Bridgehead_Concept|Bridgehead]] station | ||
+ | * '''<tt>NOMOVEINMYLOG</tt>''': Equivalent to untag <code>Edit | Move in my log only</code> | ||
+ | * '''<tt>NOSCROLLMYLOG</tt>''': Equivalent to untag <code>Edit | Move in my log only</code> | ||
+ | * '''<tt>NOSUPPORT</tt>''' (or '''<tt>NOPARTNER</tt>'''): Equivalent to <code>Commands | Station type | Support [unchecked]</code> | ||
+ | * '''<tt>OPNAME</tt>''' (or '''<tt>MYNAME</tt>'''): Edit current operator name (used in NAQP M/2 only) | ||
+ | * '''<tt>OPON</tt>''' (or '''<tt>LOGIN</tt>'''): Log in as an operator | ||
+ | * '''<tt>OPOFF</tt>''' (or '''<tt>LOGOUT</tt>'''): Log out as an operator | ||
* '''<tt>RUN1</tt>''': Equivalent to <code>Commands | Station type | Run 1</code> | * '''<tt>RUN1</tt>''': Equivalent to <code>Commands | Station type | Run 1</code> | ||
* '''<tt>RUN2</tt>''': Equivalent to <code>Commands | Station type | Run 2</code> | * '''<tt>RUN2</tt>''': Equivalent to <code>Commands | Station type | Run 2</code> | ||
+ | * '''<tt>RUN</tt>''': Equivalent to <code>Commands | Station type | Run</code> | ||
* '''<tt>SUPPORT</tt>''' (or '''<tt>PARTNER</tt>'''): Equivalent to <code>Commands | Station type | Support [checked]</code> | * '''<tt>SUPPORT</tt>''' (or '''<tt>PARTNER</tt>'''): Equivalent to <code>Commands | Station type | Support [checked]</code> | ||
− | * '''<tt> | + | * '''<tt>SCROLLMYLOG</tt>''': Equivalent to tag <code>Edit | Move in my log only</code> |
− | |||
===Open/Close/Database Functions=== | ===Open/Close/Database Functions=== | ||
+ | * '''<tt>AUTORELOAD</tt>''' or '''<tt>NOAUTORELOAD</tt>''': Equivalent to <code>Options | Load contest at startup | Enabled</code> | ||
+ | * '''<tt>BYE</tt>''': Equivalent to <code>File | Quit</code> | ||
+ | * '''<tt>CLEARLOG</tt>''': Equivalent to <code>Edit | Delete all QSO</code> | ||
+ | * '''<tt>CLEARLOGNOW</tt>''': Equivalent to <tt>CLEARLOG</tt>, but doesn't ask for confirmation. '''Use with caution!''' | ||
+ | * '''<tt>CLOSE</tt>''': Equivalent to <code>File | Close</code> | ||
+ | * '''<tt>COPYLOG</tt>''': Save a copy of the current log file (.wt4) in the current log directory with a timestamp added to its name | ||
+ | * '''<tt>COPYLOGCLEAR</tt>''': Equivalent to the COPYLOG command immediately followed by a CLEARLOG command | ||
* '''<tt>NEW</tt>''': Equivalent to <code>File | New</code> | * '''<tt>NEW</tt>''': Equivalent to <code>File | New</code> | ||
* '''<tt>OPEN</tt>''': Equivalent to <code>File | Open</code> | * '''<tt>OPEN</tt>''': Equivalent to <code>File | Open</code> | ||
+ | * '''<tt>QUIT</tt>''' (or '''<tt>EXIT</tt>'''): Equivalent to <code>File | Quit</code> | ||
* '''<tt>RELOAD</tt>''' (or '''<tt>REOPEN</tt>'''): Reopens the current opened file | * '''<tt>RELOAD</tt>''' (or '''<tt>REOPEN</tt>'''): Reopens the current opened file | ||
* '''<tt>RELOADNOW</tt>''' (or '''<tt>REOPENNOW</tt>'''): Reopens the current opened file, but does not display the contest configuration dialog. | * '''<tt>RELOADNOW</tt>''' (or '''<tt>REOPENNOW</tt>'''): Reopens the current opened file, but does not display the contest configuration dialog. | ||
− | * '''<tt> | + | * '''<tt>RESTART</tt>''': Restarts Win-Test |
− | |||
− | |||
− | |||
* '''<tt>SAVELOG</tt>''': Equivalent to <code>File | Backup contest</code> | * '''<tt>SAVELOG</tt>''': Equivalent to <code>File | Backup contest</code> | ||
* '''<tt>WRITEDB</tt>''': Equivalent to <code>File | Update database</code> | * '''<tt>WRITEDB</tt>''': Equivalent to <code>File | Update database</code> | ||
− | * '''<tt> | + | * '''<tt>WRITELOG</tt>''' (or '''<tt>MAKELOG</tt>'''): Equivalent to <code>File | Creating log files</code> |
===Frequency Control Functions=== | ===Frequency Control Functions=== | ||
* '''<tt>PASSFREQ</tt>''' (or '''<tt>QSYFREQ</tt>'''): Equivalent to <code>Commands | QSY frequency</code> | * '''<tt>PASSFREQ</tt>''' (or '''<tt>QSYFREQ</tt>'''): Equivalent to <code>Commands | QSY frequency</code> | ||
+ | * '''<tt>QSX</tt>''': Equivalent to <code>Commands | Split frequency</code> | ||
+ | * '''<tt>NOQSX</tt>''' (or '''<tt>SPLITOFF</tt>'''): turns split operation off | ||
+ | * '''<tt>RUNFREQ</tt>''': Moves to last Run frequency, equivalent to '''<tt>Alt-F4</tt>''' | ||
* '''<tt>SPLITFREQ</tt>''': Equivalent to <code>Commands | Split frequency</code> | * '''<tt>SPLITFREQ</tt>''': Equivalent to <code>Commands | Split frequency</code> | ||
* '''<tt>NOSPLIT</tt>''' (or '''<tt>SPLITOFF</tt>'''): turns split operation off | * '''<tt>NOSPLIT</tt>''' (or '''<tt>SPLITOFF</tt>'''): turns split operation off | ||
− | * '''<tt> | + | * '''<tt>SWAP</tt>''': Equivalent to <code>Commands | Swap the frequency on both radios</code> |
===Log synchronisation=== | ===Log synchronisation=== | ||
Line 89: | Line 122: | ||
===WinKey=== | ===WinKey=== | ||
− | *'''<tt>WKSWAP</tt>''' (or '''<tt>WKREVERSE</tt>'''): Reverse the paddles | + | *'''<tt>WKSETUP</tt>''': Equivalent to <code>Options | WinKey configuration...</code> |
+ | *'''<tt>WKSWAP</tt>''' (or '''<tt>WKREVERSE</tt>'''): Equivalent to <code>Options | WinKey configuration... | Swap paddles</code>. Reverse the paddles attached to your WinKey. This is a toggle; paddles change every time this command is run. | ||
===Other Functions=== | ===Other Functions=== | ||
− | + | * '''<tt>AUTOCQ</tt>''' or '''<tt>CQAUTO</tt>''': Enable automatic CQ Repeat mode | |
+ | * '''<tt>AUTOCW</tt>''' or '''<tt>CWAUTO</tt>''': Enable CW Auto Send | ||
+ | * '''<tt>CLEARGAB</tt>''': Clear Gab window (Alt-I) | ||
+ | * '''<tt>CLOSEALL</tt>''': Equivalent to <code>Windows | Close all</code> | ||
+ | * '''<tt>CTYFILES</tt>''' or '''<tt>COUNTRYFILES</tt>''': Eq. to <code>Options | Data files | Country files...</code> | ||
* '''<tt>DEFINEKEYS</tt>''': Equivalent to <code>Options | Redefine keyboard keys</code> | * '''<tt>DEFINEKEYS</tt>''': Equivalent to <code>Options | Redefine keyboard keys</code> | ||
+ | * '''<tt>EZSETUP</tt>''': Equivalent to Options / EZMaster configuration... | ||
+ | * '''<tt>HEADERS</tt>''': Equivalent to <code>Options | Log display | Hide headers disabled</code> | ||
+ | * '''<tt>NOHEADERS</tt>''': Equivalent to <code>Options | Log display | Hide headers enabled</code> | ||
+ | * '''<tt>HELP</tt>''': Open reference manual | ||
+ | * '''<tt>KEYB</tt>''': Change keyboard layout, append layout designator with slash, like '''<tt>KEYB/FRA</tt>''','''<tt>KEYB/DEU</tt>''', '''<tt>KEYB/ENU</tt>'''; see [http://www.microsoft.com/globaldev/reference/winxp/langtla.mspx] for details. | ||
+ | * '''<tt>MKSETUP</tt>''': Equivalent to Options / MK/MKII/MK2R configuration... | ||
+ | * '''<tt>MP3SETUP</tt>''': Equivalent to Options / MP3 configuration... | ||
+ | * '''<tt>NOAUTOCQ</tt>''' or '''<tt>NOCQAUTO</tt>''': Disable automatic CQ Repeat mode | ||
+ | * '''<tt>NOAUTOCW</tt>''' or '''<tt>NOCWAUTO</tt>''': Disable CW Auto Send | ||
+ | * '''<tt>NORPTESCONLY</tt>''': Stop AutoCQ by any keyboard activity | ||
+ | * '''<tt>NORUNSP</tt>''': Disable RUN/S&P-Switchting | ||
+ | * '''<tt>NOTEXTCMDTIP</tt>''' (or '''<tt>NOTXTCMDTIP</tt>'''): Don't display tooltips in Menu operations | ||
+ | * '''<tt>QUICKQSL</tt>''': Enable intelligent Quick QSL feature | ||
+ | * '''<tt>REMAPKEYS</tt>''': Equivalent to <code>Options | Redefine keyboard keys</code> | ||
+ | * '''<tt>REMOTE</tt>''': Equivalent to <code>Commands | Remote commands...</code>. Opens the [[Menu:Commands#Remote_commands...|Remote Commands Dialog]] | ||
+ | * '''<tt>RPTESCONLY</tt>''': Stop AutoCQ by pressing the Escape key only | ||
+ | * '''<tt>RTTYSETUP</tt>''': Equivalent to <code>Options | RTTY Configuration...</code> | ||
+ | * '''<tt>RUNSP</tt>''': Enable RUN/S&P-Switchting | ||
+ | * '''<tt>RUNSPON</tt>''': Enable RUN/S&P-Switchting | ||
+ | * '''<tt>RUNSPOFF</tt>''': DISABLE RUN/S&P-Switchting | ||
+ | * '''<tt>SCRIPTS</tt>''': Equivalent to <code>Tools | Scripts Manager</code> | ||
* '''<tt>SETUP</tt>''': Equivalent to <code>Options | Configure Interfaces</code> | * '''<tt>SETUP</tt>''': Equivalent to <code>Options | Configure Interfaces</code> | ||
+ | * '''<tt>TEXTCMDTIP</tt>''' (or '''<tt>TXTCMDTIP</tt>'''): Display tooltips in Menu operations | ||
+ | * '''<tt>VERSION</tt>''': Equivalent to <code>Help | About</code> | ||
+ | * '''<tt>WCY</tt>''': Equivalent to <code>Windows | Solar Activity | Displayed data | WCY</code> | ||
* '''<tt>WWV</tt>''': Equivalent to <code>Windows | Solar Activity | Displayed data | WWV</code> | * '''<tt>WWV</tt>''': Equivalent to <code>Windows | Solar Activity | Displayed data | WWV</code> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 12:15, 4 April 2020
Text Commands
Text commands are a comfortable and fast way to access different functions of the Win-Test software. These commands have to be typed right into the callsign field of the Log entry window. They will be executed after pressing [Enter]. If the command was executed sucessfully, the command text will be deleted from the callsign field.
Changing Bands or Jumping to a Frequency
You can directly enter the band to which you want to QSY (if permitted for the current contest): 160, 80, 40, 144, 432, 241G, etc.
For frequencies below 30 MHz, enter the wavelength in meters (80 for 3.8 MHz, not 75). For frequencies above 30 MHz and below 10 GHz, enter the frequency in MHz. Above (and including) 10 GHz, enter 10G (or 24G, etc.). This behaviour may depend on the Tools | Data Entry | Priority setting.
You can also directly type a frequency (in kHz): for example 14234.4, 1843, 144300, etc. If a radio is connected to your computer, it will jump to the desired frequency. You can also just enter the kHz part of the frequency of the current band (e.g. while on 20m, entering 035.5 will tune your radio on 14035.5). Finally, you can also enter the frequency by omitting the decimal point (CT style) (e.g. 18404 will tune your radio on 1840.4).
Of course, all the Win-Test windows will be updated according to the new frequency or band.
To return to your last CQ frequency, press [Alt-F4].
Changing Mode
You can directly change the operating mode by typing CW, SSB etc. The mode will be switched as soon as you press Enter.
There are also shortcuts for changing the mode: Ctrl-F1 or Ctrl-F2 will cycle through all the available modes.
Of course, the chosen mode will have to be compatible with the rules of the chosen contest, otherwise Win-Test will ignore this command (error detection in the field).
List of Text Commands
These text commands provide fast access to many of the functions listed in the Win-Test menus. Just type the text command in the callsign field, and press [Enter].
CW Functions
- BURSTS: Enable CW speed bursts (controlled with ++/-- in macros), equivalent to
Options | CW | Speed Bursts enabled
- NOBURSTS: Disable CW speed bursts (controlled with ++/(-- in macros), equivalent to
Options | CW | Speed Bursts disabled
- CORRECT: Equivalent to
Options | CW | Correction | Enabled
- NOCORRECT: Equivalent to
Options | CW | Correction | Disabled
- CTSPACE: Equivalent to
Options | CW | Shortened spaces (CT spaces) enabled
- NOCTSPACE: Equivalent to
Options | CW | Shortened spaces (CT spaces) disabled
- CUTON: Enable cut numbers translation
- CUTOFF: Disable cut numbers translation
- CWAUTO: Enable CW Auto Sending Mode
- CWAUTO3: Start CW Auto Sending after 3 characters in the callsign field
- CWAUTO4: Start CW Auto Sending after 4 characters in the callsign field
- CWAUTOOFF (or NOCWAUTO): Disable CW Auto Sending Mode
- CWFULLABBREV (or FULLABBREV): Equivalent to
Options | CW | Serial number | Abbreviated
- CWPROABBREV (or PROABBREV): Equivalent to
Options | CW | Serial number | Pro
- CWSEMIABBREV (or SEMIABBREV): Equivalent to
Options | CW | Serial number | Half abbreviated
- NOCWABBREV (or NOABBREV): Equivalent to
Options | CW | Serial number | Not abbreviated
- ESM (or NOESM): Enable/disable Enter Sends Message Mode; equivalent to
Tools | Data Entry | Enable ESM [checked]
- LEADINGZEROS (or LZ): Equivalent to
Options | CW | Serial number | Leading zeros [checked]
- NOLEADINGZEROS (or NOLZ): Equivalent to
Options | CW | Serial number | Leading zeros [unchecked]
- MESSAGES (or MSGS): Equivalent to
Options | CW | Modify standard messages...
- REPEAT (or RPT): Equivalent to
Options | Automatic CQ repeat mode [checked]
- RPTDELAY: Equivalent to Tools / Automatic CQ repeat, with the focus set to the repeat interval field
- NOREPEAT (or NORPT): Equivalent to
Options | Automatic CQ repeat mode [unchecked]
- SMARTCORRECT (or SMART): Equivalent to
Options | CW | Correction | Smart Correction enabled
- NOSMARTCORREC (or NOSMART): Equivalent to
Options | CW | Correction | Smart Correction disabled
- SOUND: Equivalent to
Options | CW | No sound [unchecked]
- NOSOUND: Equivalent to
Options | CW | No sound [checked]
- SPEED (or CWSPEED) Equivalent to
Commands | CW speed
- TUNE: Equivalent to
Commands | Carrier
- VARIABLES: Equivalent to
Options | CW | Custom variables...
- WEIGHT (or CWWEIGHT): Equivalent to
Commands | CW weight
- WORKDUPE (or WORKDUPEON): Equivalent to
Options | CW | Work dupes
(checked). The normal exchange will be sent to all dupes; the $QSOB4 message variable will be ignored. - NOWORKDUPE (or WORKDUPEOFF): Equivalent to
Options | CW | Work dupes
(unchecked). Causes the $QSOB4 message to be sent to all dupes instead of the exchange, for example, when the [Insert] key is programmed as $LOGGEDCALL $QSOB4 $GUESSEXCH $F2
Voice Keyer Control Functions
- MIC: Enables the mic input when the Voice Keyer (VK) is not playing
- NOMIC: Mutes the mic input when the VK is not playing (default)
- MICWHENPLAY: Enables the mic input when the VK is playing
- NOMICWHENPLAY: Mutes the mic input when the VK is playing (default)
Multi Operating
- BRIDGEHEAD: Make the current station a Bridgehead station
- INVENTORY (or INV): Requests all connected Stations to send their version number and status information.
- Time Master stations are indicated by a capital M character (else m)
- Bridgeheads by the capital character B (else b)
- stations which have enabled log synching are marked with a capital S, while s means log sync is disabled
- MOVEINMYLOG: Equivalent to tag
Edit | Move in my log only
- MULT: Equivalent to
Commands | Station type | Mult
- NOBRIDGEHEAD: Make the current station a non Bridgehead station
- NOMOVEINMYLOG: Equivalent to untag
Edit | Move in my log only
- NOSCROLLMYLOG: Equivalent to untag
Edit | Move in my log only
- NOSUPPORT (or NOPARTNER): Equivalent to
Commands | Station type | Support [unchecked]
- OPNAME (or MYNAME): Edit current operator name (used in NAQP M/2 only)
- OPON (or LOGIN): Log in as an operator
- OPOFF (or LOGOUT): Log out as an operator
- RUN1: Equivalent to
Commands | Station type | Run 1
- RUN2: Equivalent to
Commands | Station type | Run 2
- RUN: Equivalent to
Commands | Station type | Run
- SUPPORT (or PARTNER): Equivalent to
Commands | Station type | Support [checked]
- SCROLLMYLOG: Equivalent to tag
Edit | Move in my log only
Open/Close/Database Functions
- AUTORELOAD or NOAUTORELOAD: Equivalent to
Options | Load contest at startup | Enabled
- BYE: Equivalent to
File | Quit
- CLEARLOG: Equivalent to
Edit | Delete all QSO
- CLEARLOGNOW: Equivalent to CLEARLOG, but doesn't ask for confirmation. Use with caution!
- CLOSE: Equivalent to
File | Close
- COPYLOG: Save a copy of the current log file (.wt4) in the current log directory with a timestamp added to its name
- COPYLOGCLEAR: Equivalent to the COPYLOG command immediately followed by a CLEARLOG command
- NEW: Equivalent to
File | New
- OPEN: Equivalent to
File | Open
- QUIT (or EXIT): Equivalent to
File | Quit
- RELOAD (or REOPEN): Reopens the current opened file
- RELOADNOW (or REOPENNOW): Reopens the current opened file, but does not display the contest configuration dialog.
- RESTART: Restarts Win-Test
- SAVELOG: Equivalent to
File | Backup contest
- WRITEDB: Equivalent to
File | Update database
- WRITELOG (or MAKELOG): Equivalent to
File | Creating log files
Frequency Control Functions
- PASSFREQ (or QSYFREQ): Equivalent to
Commands | QSY frequency
- QSX: Equivalent to
Commands | Split frequency
- NOQSX (or SPLITOFF): turns split operation off
- RUNFREQ: Moves to last Run frequency, equivalent to Alt-F4
- SPLITFREQ: Equivalent to
Commands | Split frequency
- NOSPLIT (or SPLITOFF): turns split operation off
- SWAP: Equivalent to
Commands | Swap the frequency on both radios
Log synchronisation
- SYNC (or SYNLOGS): Equivalent to
Options | Disable log synchronization on network
(unchecked) - NOSYNC (or NOSYNLOGS): Equivalent to
Options | Disable log synchronization on network
(checked)
WinKey
- WKSETUP: Equivalent to
Options | WinKey configuration...
- WKSWAP (or WKREVERSE): Equivalent to
Options | WinKey configuration... | Swap paddles
. Reverse the paddles attached to your WinKey. This is a toggle; paddles change every time this command is run.
Other Functions
- AUTOCQ or CQAUTO: Enable automatic CQ Repeat mode
- AUTOCW or CWAUTO: Enable CW Auto Send
- CLEARGAB: Clear Gab window (Alt-I)
- CLOSEALL: Equivalent to
Windows | Close all
- CTYFILES or COUNTRYFILES: Eq. to
Options | Data files | Country files...
- DEFINEKEYS: Equivalent to
Options | Redefine keyboard keys
- EZSETUP: Equivalent to Options / EZMaster configuration...
- HEADERS: Equivalent to
Options | Log display | Hide headers disabled
- NOHEADERS: Equivalent to
Options | Log display | Hide headers enabled
- HELP: Open reference manual
- KEYB: Change keyboard layout, append layout designator with slash, like KEYB/FRA,KEYB/DEU, KEYB/ENU; see [1] for details.
- MKSETUP: Equivalent to Options / MK/MKII/MK2R configuration...
- MP3SETUP: Equivalent to Options / MP3 configuration...
- NOAUTOCQ or NOCQAUTO: Disable automatic CQ Repeat mode
- NOAUTOCW or NOCWAUTO: Disable CW Auto Send
- NORPTESCONLY: Stop AutoCQ by any keyboard activity
- NORUNSP: Disable RUN/S&P-Switchting
- NOTEXTCMDTIP (or NOTXTCMDTIP): Don't display tooltips in Menu operations
- QUICKQSL: Enable intelligent Quick QSL feature
- REMAPKEYS: Equivalent to
Options | Redefine keyboard keys
- REMOTE: Equivalent to
Commands | Remote commands...
. Opens the Remote Commands Dialog - RPTESCONLY: Stop AutoCQ by pressing the Escape key only
- RTTYSETUP: Equivalent to
Options | RTTY Configuration...
- RUNSP: Enable RUN/S&P-Switchting
- RUNSPON: Enable RUN/S&P-Switchting
- RUNSPOFF: DISABLE RUN/S&P-Switchting
- SCRIPTS: Equivalent to
Tools | Scripts Manager
- SETUP: Equivalent to
Options | Configure Interfaces
- TEXTCMDTIP (or TXTCMDTIP): Display tooltips in Menu operations
- VERSION: Equivalent to
Help | About
- WCY: Equivalent to
Windows | Solar Activity | Displayed data | WCY
- WWV: Equivalent to
Windows | Solar Activity | Displayed data | WWV