Difference between revisions of "SO2R/EZMaster"

From Win-Test Wiki
Jump to navigation Jump to search
 
Line 3: Line 3:
 
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility.
 
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility.
  
The user must check in the menu Operating | Technique | Advanced SO2R and must check in the menu Operating| Shift binds to the secondary radio. The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an Ezmaster choose for settings 19200 bits per second,  8 data bits, none parity, and 1 stop bits, CW for DTR, PTT for RTS and Both Radios active. Finally the user must set in the case of an Ezmaster control box in the menu Options | Ezmaster configuration, and choose the radios communication data. For example for two FT1000MPs the settings are port rs232 and com (cable connecting radios to Ezmaster), 4800 bauds speed, 8 bits, none parity, 2 stop .
+
===Setting up the technique===
 +
 
 +
The user must check in the menu Operating | Technique | Advanced SO2R  
 +
 
 +
===Setting up the Shift key for secondary radio===
 +
 
 +
The user must check in the menu Operating| Shift binds to the secondary radio.
 +
 
 +
===Setting the SO2R Control box===
 +
 
 +
The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an Ezmaster choose for settings 19200 bits per second,  8 data bits, none parity, and 1 stop bits, CW for DTR, PTT for RTS and Both Radios active.
 +
 
 +
Finally the user must set in the case of an Ezmaster control box in the menu Options | Ezmaster configuration, and choose the radios communication data. For example for two FT1000MPs the settings are port rs232 and com (cable connecting radios to Ezmaster), 4800 bauds speed, 8 bits, none parity, 2 stop .

Revision as of 13:16, 5 October 2006

Setting up the EZMaster for use with Win-Test

Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility.

Setting up the technique

The user must check in the menu Operating | Technique | Advanced SO2R

Setting up the Shift key for secondary radio

The user must check in the menu Operating| Shift binds to the secondary radio.

Setting the SO2R Control box

The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an Ezmaster choose for settings 19200 bits per second, 8 data bits, none parity, and 1 stop bits, CW for DTR, PTT for RTS and Both Radios active.

Finally the user must set in the case of an Ezmaster control box in the menu Options | Ezmaster configuration, and choose the radios communication data. For example for two FT1000MPs the settings are port rs232 and com (cable connecting radios to Ezmaster), 4800 bauds speed, 8 bits, none parity, 2 stop .