Keys
Revision as of 22:42, 9 October 2006 by Dl6rai (talk | contribs) (→Editing and moving around the QSO entry line)
Editing and moving around the QSO entry line
- [Enter]: Log a contact
- [Spacebar]: Move cursor between callsign entry and report fields
- [Left arrow]: Move cursor one character to the left
- [Right arrow]: Move cursor one character to the right
- [Home]: Move cursor to the beginning of the field
- [End]: Moves the cursor to the end of the field
- [Backspace]: Delete the character located left of the cursor
- [Tab] : Move cursor between sent RST and received number fields
- [>]: Move cursor through all fields, including time
- [<]: Move cursor through all fields, including time
- [Del]: Delete the character located under the cursor
- [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
- Alt-W: Clear QSO (like F11)
- Alt-F8: Clear QSO (like F11)
- Alt-F: Edit QSO date and time
- Alt-N: Write a note regarding this QSO
- Alt-Up arrow: Copy the previous QSO in the log
- Ctrl-A: like [Home]
- Ctrl-E: like [End]
- Ctrl-W: Clear the current field; if report field is cleared, initialise RST
- Ctrl-K: Clear from cursor position until end of field
- Ctrl-Left arrow: like [Home]
- Ctrl-Right arrow: like [End]
- Shift-Backspace: Delete all the characters left of the cursor
- Shift-Del: Delete all characters under and right of the cursor
Movement in the log
Warning: Any movement in the log validates the QSO where the cursor was located before the movement!
- [Up arrow]: Move one QSO up
- [Down arrow]: Move one QSO down
- [PageUp]: Move 10 QSOs up
- [PageDown]: Move 10 QSOs down
- Ctrl-G: Go to a specific QSO number
- Ctrl-Home: Go to first QSO in log
- Ctrl-End: Go to last QSO in log
- Ctrl-PageUp: Go back 24 hours
Message keys
- [F1]: Play message n°1. Normally, this message is the CQ
- [F2]: Play message n°2. Normally, this message is the report sent (full)
- [F3]: Play message n°3. Normally, this message is the serial number sent
- [F4]: Play message n°4. Normally, this message is your call
- [F5]: Play message n°5. Normally, this message is the logged callsign
- [F6]: Play message n°6 (CW only)
- [F7]: Play message n°7 (CW only)
- [Insert]: Play the message definied for this key (CW only) - normally, this message is the logged callsign the full sent report
- [+]: Play the message definied for this key (CW only) - normally, this message sends a TU, then your callsign and automatically validates the logged QSO
- [Esc]: Stop the output message being sent
- Alt-K: Toggle Keyboard mode
- Alt-C: Send or modify additional messages
- Alt-F9: Decrease CW speed by 2 WPM
- Alt-F10: Increase CW speed by 2 WPM
- Shift-F1...Shift-F7: Record messages n°1 to n°7
- Shift-Insert: Record the message associated to the [Insert] key
- Shift-+: Records the message associated to the [+] key
Open and Close Windows
- F8: Open/Close Check Partials Window
- F9: Open/Close Check call Window
- F10: Open/Close Check multipliers Window
- F12: Open/Close Check Partials Window
- Alt-B: Open/Close Skeds Window
- Alt-E: Take a sked
- Alt-M: Open/Close Mult Window
- Alt-R: Open/Close Rate Window
- Alt-S: Open/Close Summary
- Alt-Z: Open/Close Worked zones Window
- Ctrl-F9: Open/Close Statistics Window
- Shift-F10: Reverse Mult Check - display calls worked from that Multiplier by band in Check Partials window
Radio Control
- -: Split frequency
- *: Switch active radio
- Alt-:: Switch active radio
- Alt-F1: QSY band down (20 => 40 => ...)
- Alt-F2: QSY band up (20 => 15 => ...)
- Alt-F4: QSY back to run frequency
- Alt-F5: Set run frequency
- Ctrl-T: Tune the transmitter (on CW)
- Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)
Packet
- Alt-A: Open/Close DX-Cluster Anouncements Window
- Alt-O: Open/Close DX-Cluster Monitor Window
- Alt-T: Talk to DX-Cluster
- Alt-F3: Spot
Band Map
- Ctrl-Enter: Insert spot into Band Map
- Ctrl-Del: Delete spot on current frequency in the active Band Map
- Ctrl-J: Insert spot into Band Map
- Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
- Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
- Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
- Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
- Ctrl-Space: Grab the current on the current frequency
Networking
- Alt-D: Pass a station
- Alt-G: Send a gab
- Alt-I: Open Gab Window
- Alt-J: Display status of all stations in the network
Multi Operator
- Alt-Y: Toggle current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
- Ctrl-F3: Toggle current QSO (like Alt-Y)
Partner Mode
- Alt-Enter: Add call to partner window
- Alt-1...Alt-9: Grab nth call in partner window
- Ctrl-1...Ctrl-9: Swap nth call in partner window with QSO entry line
Special Keys
- Alt-L: open QTC RX window
- Ctrl-L: open QTC TX window