Difference between revisions of "Keys"

From Win-Test Wiki
Jump to navigation Jump to search
 
(76 intermediate revisions by 7 users not shown)
Line 1: Line 1:
==Cursor's movement in the log==
+
<!-- Adopted to Stylesheet DL6RAI -->
  
* Left arrow : Moves the cursor one character to the left
+
==Editing and moving around the QSO entry line==
* Right arrow : Moves the cursor one character to the right
+
* ['''<tt>Enter</tt>''']: Log a contact
* Home (or Ctrl - Left arrow) : Moves the cursor to the left of the field
+
* ['''<tt>Spacebar</tt>''']: Move cursor between callsign entry and report fields
* End (or Ctrl - Right arrow) : Moves the cursor to the beginning of the field
+
* ['''<tt>Left arrow</tt>''']: Move cursor one character to the left
* Backspace : Deletes the character located just before the cursor
+
* ['''<tt>Right arrow</tt>''']: Move cursor one character to the right
* Shift - Backspace : Deletes all the characters located before the cursor
+
* ['''<tt>Home</tt>''']: Move cursor to the beginning of the field
* Del : Deletes the character located under the cursor
+
* ['''<tt>End</tt>''']: Moves the cursor to the end of the field
* Shift - Del : Deletes all the characters located after and under the cursor
+
* ['''<tt>Backspace</tt>''']: Delete the character located left of the cursor
* Ctrl - W : Deletes the current field
+
* ['''<tt>Tab</tt>'''] : Move cursor between sent RST and received number fields
* F11 : Deletes all the fields of the current QSO, and locates the cursor in the callsign logging field
+
* ['''<tt>></tt>''']: Move cursor to next field in the main log.
 +
* ['''<tt><</tt>''']: Move cursor to previous field in the main log.
 +
* ['''<tt>Del</tt>''']: Delete the character located under the cursor
 +
* ['''<tt>F11</tt>''']: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
 +
* '''<tt>Alt-W</tt>''': Clear QSO (like '''<tt>F11</tt>''')
 +
* '''<tt>Alt-F8</tt>''': Clear QSO (like '''<tt>F11</tt>''')
 +
* '''<tt>Alt-F</tt>''': Edit QSO date and time
 +
* '''<tt>Alt-N</tt>''': Write a note regarding this QSO
 +
* '''<tt>Alt-Up arrow</tt>''': Copy the previous QSO in the log
 +
* '''<tt>Ctrl-A</tt>''': Like ['''<tt>Home</tt>''']
 +
* '''<tt>Ctrl-B</tt>''': Like ['''<tt>Left arrow</tt>''']
 +
* '''<tt>Ctrl-D</tt>''': Like ['''<tt>Del</tt>''']
 +
* '''<tt>Ctrl-E</tt>''': Like ['''<tt>End</tt>''']
 +
* '''<tt>Ctrl-F</tt>''': Like ['''<tt>Right arrow</tt>''']
 +
* '''<tt>Ctrl-W</tt>''': Clear the current field; if report field is cleared, initialise RST
 +
* '''<tt>Ctrl-K</tt>''': Like ['''<tt>Shift-Del</tt>''']
 +
* '''<tt>Ctrl-Z</tt>''': Undo - restores edited QSO data to prior value (see [[Menu:Edit#Restore_QSO]])
 +
* '''<tt>Ctrl-Left arrow</tt>''': Like ['''<tt>Home</tt>''']
 +
* '''<tt>Ctrl-Right arrow</tt>''': Like ['''<tt>End</tt>''']
 +
* '''<tt>Ctrl-F10</tt>''': Change fixed report in other QSOs to this QSO's report (to correct zone/age whatever consistenly)
 +
* '''<tt>Shift-Backspace</tt>''': Delete all the characters left of the cursor
 +
* '''<tt>Shift-Del</tt>''': Delete all characters under and right of the cursor
  
==Movement between the different QSO fields==
+
==Movement in the log==
  
* Space bar : Toggles the cursor between the principal fields (Callsign and received report in HF; Callsign, received report and gridsquare in VHF)
+
Warning: Any movement in the log validates the QSO where the cursor was located before the movement!
* Tab or < or > : Toggles the cursor between the possible logging fields
 
  
==Movement in the log==
+
* ['''<tt>Up arrow</tt>''']: Move one QSO up
 +
* ['''<tt>Down arrow</tt>''']: Move one QSO down
 +
* ['''<tt>PgUp</tt>''']: Move 10 QSOs up
 +
* ['''<tt>PgDn</tt>''']: Move 10 QSOs down
 +
* '''<tt>Ctrl-Shift-G</tt>''': Go to callsign (press again for next QSO with this callsign)
 +
* '''<tt>Ctrl-G</tt>''': Go to a specific QSO number
 +
** To skip the dialog box prompt, just enter the QSO number into the callsign field, then Press '''<tt>Ctrl-G</tt>'''.  To return to the end of the log, press '''<tt>Ctrl-G</tt>''', ['''<tt>Spacebar</tt>''']
 +
* '''<tt>Ctrl-G</tt>''', ['''<tt>Home</tt>''']: Go to first QSO in log
 +
* '''<tt>Ctrl-G</tt>''', ['''<tt>End</tt>''']: Go to last QSO in log
 +
* '''<tt>Ctrl-Home</tt>''': Go to first QSO in log
 +
* '''<tt>Ctrl-End</tt>''': Go to last QSO in log
 +
* '''<tt>Ctrl-PgDn</tt>''': Go forward 12 hours in the log
 +
* '''<tt>Ctrl-PgUp</tt>''': Go back 12 hours in the log
  
Warning : Any movement in the log validates the QSO where the cursor was located before the movement !
+
==Message keys==
 +
* ['''<tt>F1</tt>''']: Play message #1. Normally, this message is the CQ
 +
* ['''<tt>F2</tt>''']: Play message #2. Normally, this message is the report sent (full)
 +
* ['''<tt>F3</tt>''']: Play message #3. Normally, this message is the serial number sent
 +
* ['''<tt>F4</tt>''']: Play message #4. Normally, this message is your call
 +
* ['''<tt>F5</tt>''']: Play message #5. Normally, this message is the logged callsign
 +
* ['''<tt>F6</tt>''']: Play message #6. Normally, this message sends Call? or NR?
 +
* ['''<tt>F7</tt>''']: Play message #7. Normally, this message sends "?" or "Again?"
 +
* ['''<tt>Insert</tt>''']: Play the message defined for this key - normally, this message is the logged callsign the full sent report. On Phone this key is bound to the F2 message.
 +
* ['''<tt>+</tt>''']: Play the message defined for this key - normally, this message sends a TU, then your callsign and automatically logs the QSO. On Phone this key is bound to the F3 message. See also [[Menu:Tools#Remapping_.5B.2A.5D_and_.5B.2B.5D_when_using_Notebook_or_Mini_keyboard|Remapping [+] when using a Notebook or Mini keyboard]].
 +
* ['''<tt>Esc</tt>''']: Stop the output message being sent
 +
* '''<tt>Alt-K</tt>''': Toggle Keyboard mode
 +
* '''<tt>Alt-C</tt>''': Send or modify additional messages
 +
* '''<tt>Alt-V</tt>''': Change CW speed (opens "CW-Speed" dialog box)
 +
* '''<tt>Alt-F9</tt>''': Decrease CW speed by 2 WPM
 +
* '''<tt>Alt-F10</tt>''': Increase CW speed by 2 WPM
 +
* '''<tt>Shift-F1</tt>'''...'''<tt>Shift-F7</tt>''': Record messages #1 to #7 (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled)
 +
* '''<tt>Shift-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled).  CW/RTTY only.  For Phone, the F2 message is the Insert message.
 +
* '''<tt>Shift-+</tt>''': Records the message associated to the ['''<tt>+</tt>'''] key (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled).  CW/RTTY only.  For Phone, the F3 message is the Plus message.
 +
* '''<tt>AltGr-F1</tt>'''...'''<tt>AltGr-F7</tt>''': Record messages #1 to #7
 +
* '''<tt>AltGr-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key
 +
* '''<tt>AltGr-+</tt>''':  Records the message associated to the ['''<tt>+</tt>'''] key
 +
* '''<tt>Ctrl-Alt-F1</tt>'''...'''<tt>Ctrl-Alt-F7</tt>''': Record messages #1 to #7
 +
* '''<tt>Ctrl-Alt-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key
 +
* '''<tt>Ctrl-Alt-+</tt>''':Records the message associated to the ['''<tt>+</tt>'''] key
 +
* '''<tt>Ctrl-Tab</tt>''': Toggle between Run and S&P mode and messages (CW/RTTY)
 +
* '''<tt>Ctrl-Shift-Tab</tt>''': Toggle between Run and S&P mode and messages on the secondary radio
  
* Up arrow : Moves the cursor one QSO up in the log
+
==Open and Close Windows==
* Down arrow : Moves the cursor one QSO down in the log
+
* ['''<tt>F8</tt>''']: Open/Close N + 1 Window
* PageUp : Moves the cursor 10 QSO up in the log
+
* ['''<tt>F9</tt>''']: Open/Close Check call Window
* PageDown : Moves the cursor 10 QSO down in the log
+
* ['''<tt>F10</tt>''']: Open/Close Check Multipliers Window
* Ctrl - Home : Moves the cursor to the first QSO of the log
+
* ['''<tt>F12</tt>''']: Open/Close Check Partials Window
* Ctrl - End : Moves the cursor to the last QSO of the log
+
* '''<tt>Alt-A</tt>''': Open/Close DX-Cluster Announcements Window
 +
* '''<tt>Alt-B</tt>''': Open/Close Skeds Window
 +
* '''<tt>Alt-E</tt>''': Take a sked
 +
* '''<tt>Alt-I</tt>''': Open/Close Gab Window
 +
* '''<tt>Alt-M</tt>''': Open/Close Mult Window
 +
* '''<tt>Alt-O</tt>''': Open/Close DX-Cluster Monitor Window
 +
* '''<tt>Alt-R</tt>''': Open/Close Rate Window
 +
* '''<tt>Alt-S</tt>''': Open/Close Summary
 +
* '''<tt>Alt-X</tt>''': Open Extra Data Files Window
 +
* '''<tt>Alt-Z</tt>''': Open/Close Worked zones Window
 +
* '''<tt>Ctrl-F9</tt>''': Open/Close Statistics Window
 +
* '''<tt>Shift-F10</tt>''': Reverse Multiplier Check - Opens the [[Menu:Windows#Search_for_Worked_Multipliers_or_Partial_QTH_Locators|Search for Worked Multipliers]] Window
  
==CW and SSB keyer==
+
==Radio Control==
 +
* ['''<tt>-</tt>''']: Split frequency - enter QSX frequency here (e.g. 7239). "+1" will set the RX VFO +1 kHz from TX VFO. "0" turns split frequency mode off.
 +
* ['''<tt>*</tt>''']: Switch active radio. '''This only works with the ['''<tt>*</tt>'''] key on the numeric keypad'''.  See also [[Menu:Tools#Remapping_.5B.2A.5D_and_.5B.2B.5D_when_using_Notebook_or_Mini_keyboard|Remapping [*] when using a Notebook or Mini keyboard]].
 +
* '''<tt>Alt-:</tt>''' : Switch active radio
 +
* '''<tt>Alt-F1</tt>''': QSY band down (20 => 40 => ...)
 +
* '''<tt>Alt-F2</tt>''': QSY band up (20 => 15 => ...)
 +
* '''<tt>Alt-F4</tt>''': QSY back to run frequency, resume original CW speed
 +
* '''<tt>Alt-F5</tt>''': Set run frequency
 +
* '''<tt>Ctrl-S</tt>''': Swap the frequency on both radios (SO2R)
 +
* '''<tt>Ctrl-T</tt>''': Tune the transmitter (on CW, max 30 seconds)
 +
* '''<tt>Ctrl-F1</tt>''' and '''<tt>Ctrl-F2</tt>''': Switch mode (when the contest permits and mode=MIXED or ALL)
  
* F1 : Plays message n°1 (CW or Phone). Normally, this message is the CQ
+
==Packet==
* F2 : Plays message n°2 (CW or Phone). Normally, this message is the report sent (full)
+
* '''<tt>Alt-A</tt>''': Open/Close DX-Cluster Announcements Window
* F3 : Plays message n°3 (CW or Phone). Normally, this message is the serial number sent
+
* '''<tt>Alt-O</tt>''': Open/Close DX-Cluster Monitor Window
* F4 : Plays message n°4 (CW or Phone). Normally, this message is your call
+
* '''<tt>Alt-T</tt>''': Talk to DX-Cluster
* F5 : Plays message n°5 (CW or Phone). Normally, this message is the logged callsign
+
* '''<tt>Alt-F3</tt>''': Spot
* F6 : Plays message n°6 (CW only)
 
* F7 : Plays message n°7 (CW only)
 
* Insert : Plays the message definied for this key (CW only) : Normally, this message is the logged callsign the full sent report
 
* + [Numerical pad] : Plays the message definied for this key (CW only) : Normally, this message sends a TU, then your callsign and automatically validates the logged QSO
 
* Esc : Stops the output message being sent
 
  
* Shift - F1 to Shift - F7 : Records the messages n°1 to n°7 (CW or Phone)
+
==Band Map==
* Shift - Insert : Records the message associated to the Insert key
+
* '''<tt>Ctrl-Enter</tt>''': Insert spot into [[Menu:Windows#Radio_1.2C_Radio_2_.28Band_Maps.29|Band Map]]
* Shift - + : Records the message associated to the + key
+
* '''<tt>Ctrl-Del</tt>''': Delete spot on current frequency in the active Band Map
 +
* '''<tt>Ctrl-J</tt>''': Insert spot into Band Map
 +
* '''<tt>Ctrl-R</tt>''': Toggle band map view/list view
 +
* '''<tt>Ctrl-Up arrow</tt>''': Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
 +
* '''<tt>Ctrl-Shift-Up arrow</tt>''': Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
 +
* '''<tt>Ctrl-Down arrow</tt>''': Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
 +
* '''<tt>Ctrl-Shift-Down arrow</tt>''': Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
 +
* '''<tt>Ctrl-Space</tt>''': Grab the spot on or near the current frequency. Enter some characters and it grabs a call from the visible spots in the Radio or the DX-cluster window.
 +
* '''<tt>Ctrl-DoubleClick</tt>''' on a spot: Delete the spot without the warning window
 +
* '''<tt>Alt-DoubleClick</tt>''' on a spot: Load the sub VFO with a spot frequency (if applicable)
  
* Alt - F9 : Decreases the speed by 2 WPM (CW only)
+
==DX-Cluster Announcements==
* Alt - F10 : Increases the speed by 2 WPM (CW only)
+
* '''<tt>Ctrl-DoubleClick</tt>''' on a spot: Delete the spot without the warning window
 +
* '''<tt>Alt-DoubleClick</tt>''' on a spot: Load the sub VFO with a spot frequency (if applicable)
  
==Other keys==
+
==Networking==
 +
* '''<tt>Alt-D</tt>''': Pass a station
 +
* '''<tt>Alt-G</tt>''': Send a gab
 +
* '''<tt>Alt-I</tt>''': Open/Close Gab Window
 +
* '''<tt>Alt-J</tt>''': Display status of all stations in the network
  
* - [Numerical pad] : Equivalent to Commands / Split frequency
+
==Multi Operator==
* * [Numerical pad] : Equivalent to Commands / Radio active / Active radio
+
* '''<tt>Alt-Y</tt>''': Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa.<p>If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2.  See [[Menu:Commands#Station_Type|Menu: Commands | Station Type]].
* F8 : Equivalent to Windows / Check partials
+
* '''<tt>Ctrl-F3</tt>''': Toggle current QSO (same as '''<tt>Alt-Y</tt>''')
* F9 : Equivalent to Windows / Check call
 
* F10 : Equivalent to Windows / Check multipliers
 
* shift-F10 : Display worked stations with that Multiplier by band in checkpartial window
 
* F11 : Equivalent to Edit / Initialize QSO (see before)
 
* F12 : Equivalent to Windows / Check partials
 
  
* Alt - 1...9 : Grab nth call in partner window
+
==SO2R==
* Alt - Enter : Add call to partner window
+
* <tt>'''AltGr-A'''</tt>, <tt>'''Ctrl-Alt-A'''</tt>: Listen to the primary radio with both ears
* Alt - : : Equivalent to Commands / Radio active / Active radio
+
* <tt>'''AltGr-T'''</tt>, <tt>'''Ctrl-Alt-T'''</tt>: Listen to the secondary radio with both ears
* Alt - A : Equivalent to Windows / DX-Cluster aanouncements
+
* <tt>'''AltGr-S'''</tt>, <tt>'''Ctrl-Alt-S'''</tt>: Listen to both radios in stereo (toggle)
* Alt - B : Equivalent to Windows / Skeds
+
* <tt>'''AltGr-L'''</tt>, <tt>'''Ctrl-Alt-L'''</tt>: Listen to the "other" radio with both ears during transmit (headphone "latch")
* Alt - C : Equivalent to Options / CW / Modify additional messages
+
* <tt>'''AltGr-R'''</tt>, <tt>'''Ctrl-Alt-R'''</tt>: Restore automatic control (advanced scenarios will control headphones, like $RESET)
* Alt - D : Equivalent to Commands / Pass a station
+
* <tt>'''AltGr-1'''</tt>...<tt>'''AltGr-8'''</tt>, <tt>'''Ctrl-Alt-1'''</tt>...<tt>'''Ctrl-Alt-8'''</tt>: Select one of the eight SO2R scenarios
* Alt - E : Equivalent to Commands / Take a sked
 
* Alt - F : Equivalent to Edit / QSO and time
 
* Alt - G : Equivalent to Messages / Send a gab
 
* Alt - I : Equivalent to Windows / Gab
 
* Alt - J : Equivalent to Windows / Status
 
* Alt - K : Equivalent to Commands / Keyboard mode
 
* Alt - L : only in [[WAEDC]] - [[WAEDC|open QTC RX window]]
 
* Alt - M : Equivalent to Windows / Worked DXCC
 
* Alt - N : Equivalent to Messages / Write a note regarding this QSO
 
* Alt - O : Equivalent to Windows / DX-Cluster monitor
 
* Alt - R : Equivalent to Windows / Rate
 
* Alt - S : Equivalent to Windows / Summary
 
* Alt - T : Equivalent to Commands / DX-Cluster
 
* Alt - W : Equivalent to Edit / Initialize QSO (see before)
 
* Alt - Y : Toggles the current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
 
* Alt - Z : Equivalent to Windows / Worked zones
 
* Alt - F1 : Equivalent to Commands / QSY / One band up
 
* Alt - F2 : Equivalent to Commands / QSY / One band down
 
* Alt - F3 : Equivalent to Commands / Spot
 
* Alt - F4 : Equivalent to Commands / QSY to run frequency
 
* Alt - F8 : Equivalent to Edit / Initialize QSO (see before)
 
* Alt - Up arrow : Copy the previous QSO in the log
 
  
* Ctrl - Enter : Equivalent to Commands / Insert into BandMap
+
==Partner Mode==
* Ctrl - Del : Deletes the spot of the current frequency in the active bandmap
+
* '''<tt>Alt-Enter</tt>''': Add the call current call to the partner window
* Ctrl - G : Equivalent to Edit / Goto QSO
+
* '''<tt>Alt-Space</tt>''': Grab the call in the topmost "real time" line of the partner window
* Ctrl - J : Equivalent to Commands / Insert into BandMap
+
* '''<tt>Alt-Backpace</tt>''': Clear everything in the partner window
* Ctrl - L : only in [[WAEDC]] - [[WAEDC|open QTC TX window]]
+
* '''<tt>Alt-1</tt>'''...'''<tt>Alt-9</tt>''': Grab the ''n''th call from the partner window
* Ctrl - F1 et Ctrl - F2 : Mode toggle (when the contest permits)
+
* '''<tt>Ctrl-1</tt>'''...'''<tt>Ctrl-9</tt>''': Swap the ''n''th call in partner window with callsign in the logging window
* Ctrl - F3 : Toggles the current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
+
* '''<tt>DoubleClick</tt>''' on a callsign: Grab the call from the partner window
* Ctrl - F9 : Equivalent to Windows / Rate sheet
+
* '''<tt>Ctrl-DoubleClick</tt>''' on a callsign: Delete the call from the partner window
* Ctrl - Up arrow : Grabs the first upper spot in the active bandmap (in frequency regarding the active radio)
 
* Ctrl - Shift - Up arrow : Grabs the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
 
* Ctrl - Down arrow : Grabs the first lower spot in the active bandmap (in frequency regarding the active radio)
 
* Ctrl - Shift - Down arrow : Grabs the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
 
  
 +
==Contest Recorder==
 +
* '''<tt>AltGr-Enter</tt>''':  Play QSO
 +
* '''<tt>AltGr-Up</tt>''':  Previous QSO
 +
* '''<tt>AltGr-Down</tt>''':  Next QSO
 +
* '''<tt>AltGr-Space</tt>''':  Play/Pause
 +
* '''<tt>AltGr-PgUp</tt>''':  Rewind 30s
 +
* '''<tt>AltGr-PgDn</tt>''':  FastForward 30s
 +
* '''<tt>AltGr-Left</tt>''':  Rewind 5s
 +
* '''<tt>AltGr-Right</tt>''':  FastForward 5s
 +
* '''<tt>AltGr-E</tt>''':  Extract QSO
  
 +
Some keyboards do not have an <tt>AltGr</tt> key, so use <tt>Ctrl+Alt</tt> instead.
  
[[Main Page|Back to Main Page]]
+
==Special Keys==
 +
* '''<tt>Alt-L</tt>''':  [[WAEDC#Receiving_QTCs|Open QTC RX window]]  (to be used by EU stations)
 +
* '''<tt>Ctrl-L</tt>''': [[WAEDC#Transmitting_QTCs|Open QTC TX window]] (to be used by DX stations)

Latest revision as of 10:27, 24 July 2022


Editing and moving around the QSO entry line

  • [Enter]: Log a contact
  • [Spacebar]: Move cursor between callsign entry and report fields
  • [Left arrow]: Move cursor one character to the left
  • [Right arrow]: Move cursor one character to the right
  • [Home]: Move cursor to the beginning of the field
  • [End]: Moves the cursor to the end of the field
  • [Backspace]: Delete the character located left of the cursor
  • [Tab] : Move cursor between sent RST and received number fields
  • [>]: Move cursor to next field in the main log.
  • [<]: Move cursor to previous field in the main log.
  • [Del]: Delete the character located under the cursor
  • [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
  • Alt-W: Clear QSO (like F11)
  • Alt-F8: Clear QSO (like F11)
  • Alt-F: Edit QSO date and time
  • Alt-N: Write a note regarding this QSO
  • Alt-Up arrow: Copy the previous QSO in the log
  • Ctrl-A: Like [Home]
  • Ctrl-B: Like [Left arrow]
  • Ctrl-D: Like [Del]
  • Ctrl-E: Like [End]
  • Ctrl-F: Like [Right arrow]
  • Ctrl-W: Clear the current field; if report field is cleared, initialise RST
  • Ctrl-K: Like [Shift-Del]
  • Ctrl-Z: Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO)
  • Ctrl-Left arrow: Like [Home]
  • Ctrl-Right arrow: Like [End]
  • Ctrl-F10: Change fixed report in other QSOs to this QSO's report (to correct zone/age whatever consistenly)
  • Shift-Backspace: Delete all the characters left of the cursor
  • Shift-Del: Delete all characters under and right of the cursor

Movement in the log

Warning: Any movement in the log validates the QSO where the cursor was located before the movement!

  • [Up arrow]: Move one QSO up
  • [Down arrow]: Move one QSO down
  • [PgUp]: Move 10 QSOs up
  • [PgDn]: Move 10 QSOs down
  • Ctrl-Shift-G: Go to callsign (press again for next QSO with this callsign)
  • Ctrl-G: Go to a specific QSO number
    • To skip the dialog box prompt, just enter the QSO number into the callsign field, then Press Ctrl-G. To return to the end of the log, press Ctrl-G, [Spacebar]
  • Ctrl-G, [Home]: Go to first QSO in log
  • Ctrl-G, [End]: Go to last QSO in log
  • Ctrl-Home: Go to first QSO in log
  • Ctrl-End: Go to last QSO in log
  • Ctrl-PgDn: Go forward 12 hours in the log
  • Ctrl-PgUp: Go back 12 hours in the log

Message keys

  • [F1]: Play message #1. Normally, this message is the CQ
  • [F2]: Play message #2. Normally, this message is the report sent (full)
  • [F3]: Play message #3. Normally, this message is the serial number sent
  • [F4]: Play message #4. Normally, this message is your call
  • [F5]: Play message #5. Normally, this message is the logged callsign
  • [F6]: Play message #6. Normally, this message sends Call? or NR?
  • [F7]: Play message #7. Normally, this message sends "?" or "Again?"
  • [Insert]: Play the message defined for this key - normally, this message is the logged callsign the full sent report. On Phone this key is bound to the F2 message.
  • [+]: Play the message defined for this key - normally, this message sends a TU, then your callsign and automatically logs the QSO. On Phone this key is bound to the F3 message. See also Remapping [+] when using a Notebook or Mini keyboard.
  • [Esc]: Stop the output message being sent
  • Alt-K: Toggle Keyboard mode
  • Alt-C: Send or modify additional messages
  • Alt-V: Change CW speed (opens "CW-Speed" dialog box)
  • Alt-F9: Decrease CW speed by 2 WPM
  • Alt-F10: Increase CW speed by 2 WPM
  • Shift-F1...Shift-F7: Record messages #1 to #7 (unless Operating | Shift binds to the second radio is enabled)
  • Shift-Insert: Record the message associated to the [Insert] key (unless Operating | Shift binds to the second radio is enabled). CW/RTTY only. For Phone, the F2 message is the Insert message.
  • Shift-+: Records the message associated to the [+] key (unless Operating | Shift binds to the second radio is enabled). CW/RTTY only. For Phone, the F3 message is the Plus message.
  • AltGr-F1...AltGr-F7: Record messages #1 to #7
  • AltGr-Insert: Record the message associated to the [Insert] key
  • AltGr-+: Records the message associated to the [+] key
  • Ctrl-Alt-F1...Ctrl-Alt-F7: Record messages #1 to #7
  • Ctrl-Alt-Insert: Record the message associated to the [Insert] key
  • Ctrl-Alt-+:Records the message associated to the [+] key
  • Ctrl-Tab: Toggle between Run and S&P mode and messages (CW/RTTY)
  • Ctrl-Shift-Tab: Toggle between Run and S&P mode and messages on the secondary radio

Open and Close Windows

  • [F8]: Open/Close N + 1 Window
  • [F9]: Open/Close Check call Window
  • [F10]: Open/Close Check Multipliers Window
  • [F12]: Open/Close Check Partials Window
  • Alt-A: Open/Close DX-Cluster Announcements Window
  • Alt-B: Open/Close Skeds Window
  • Alt-E: Take a sked
  • Alt-I: Open/Close Gab Window
  • Alt-M: Open/Close Mult Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-R: Open/Close Rate Window
  • Alt-S: Open/Close Summary
  • Alt-X: Open Extra Data Files Window
  • Alt-Z: Open/Close Worked zones Window
  • Ctrl-F9: Open/Close Statistics Window
  • Shift-F10: Reverse Multiplier Check - Opens the Search for Worked Multipliers Window

Radio Control

  • [-]: Split frequency - enter QSX frequency here (e.g. 7239). "+1" will set the RX VFO +1 kHz from TX VFO. "0" turns split frequency mode off.
  • [*]: Switch active radio. This only works with the [*] key on the numeric keypad. See also Remapping [*] when using a Notebook or Mini keyboard.
  • Alt-: : Switch active radio
  • Alt-F1: QSY band down (20 => 40 => ...)
  • Alt-F2: QSY band up (20 => 15 => ...)
  • Alt-F4: QSY back to run frequency, resume original CW speed
  • Alt-F5: Set run frequency
  • Ctrl-S: Swap the frequency on both radios (SO2R)
  • Ctrl-T: Tune the transmitter (on CW, max 30 seconds)
  • Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)

Packet

  • Alt-A: Open/Close DX-Cluster Announcements Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-T: Talk to DX-Cluster
  • Alt-F3: Spot

Band Map

  • Ctrl-Enter: Insert spot into Band Map
  • Ctrl-Del: Delete spot on current frequency in the active Band Map
  • Ctrl-J: Insert spot into Band Map
  • Ctrl-R: Toggle band map view/list view
  • Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
  • Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
  • Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
  • Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
  • Ctrl-Space: Grab the spot on or near the current frequency. Enter some characters and it grabs a call from the visible spots in the Radio or the DX-cluster window.
  • Ctrl-DoubleClick on a spot: Delete the spot without the warning window
  • Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)

DX-Cluster Announcements

  • Ctrl-DoubleClick on a spot: Delete the spot without the warning window
  • Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)

Networking

  • Alt-D: Pass a station
  • Alt-G: Send a gab
  • Alt-I: Open/Close Gab Window
  • Alt-J: Display status of all stations in the network

Multi Operator

  • Alt-Y: Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa.

    If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2. See Menu: Commands | Station Type.

  • Ctrl-F3: Toggle current QSO (same as Alt-Y)

SO2R

  • AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears
  • AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears
  • AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle)
  • AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch")
  • AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET)
  • AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios

Partner Mode

  • Alt-Enter: Add the call current call to the partner window
  • Alt-Space: Grab the call in the topmost "real time" line of the partner window
  • Alt-Backpace: Clear everything in the partner window
  • Alt-1...Alt-9: Grab the nth call from the partner window
  • Ctrl-1...Ctrl-9: Swap the nth call in partner window with callsign in the logging window
  • DoubleClick on a callsign: Grab the call from the partner window
  • Ctrl-DoubleClick on a callsign: Delete the call from the partner window

Contest Recorder

  • AltGr-Enter: Play QSO
  • AltGr-Up: Previous QSO
  • AltGr-Down: Next QSO
  • AltGr-Space: Play/Pause
  • AltGr-PgUp: Rewind 30s
  • AltGr-PgDn: FastForward 30s
  • AltGr-Left: Rewind 5s
  • AltGr-Right: FastForward 5s
  • AltGr-E: Extract QSO

Some keyboards do not have an AltGr key, so use Ctrl+Alt instead.

Special Keys