https://docs.win-test.com/w/api.php?action=feedcontributions&user=DK9TN&feedformat=atomWin-Test Wiki - User contributions [en]2024-03-29T08:54:27ZUser contributionsMediaWiki 1.35.0https://docs.win-test.com/w/index.php?title=Menu:Options&diff=4283Menu:Options2011-07-11T11:28:39Z<p>DK9TN: /* MP3 Configuration */</p>
<hr />
<div><big><big>Menu:Options</big></big><br />
<!-- Adopted to Stylesheet DL6RAI --><br />
<br />
==Load contest at startup==<br />
<code>Options | Load contest at startup</code><br><br />
Enables or disables the automatic loading of the last contest file in use. <br />
This command is useful to get on line again quickly if - for some reason - Win-Test <br />
crashed or you had to quit the Win-Test in the middle of the contest.<br />
<br />
If you like to switch to another file, close this file using <br />
<code>File | Close</code> and then <code>File | Open</code> menu dialog.<br />
<br />
If Win-Test is started with the '''<tt>[Ctrl]</tt>''' key down, it doesn't automatically load the previous log.<br />
<br />
When starting Win-Test from the command line, use '''<tt>-n</tt>''' or '''<tt>--noautoload</tt>''' option to prevent automactially loading the last file in use.<br />
<br />
==Automatic backup...==<br />
<code>Options | Automatic backup...</code><br><br />
This function enables or disables the automatic backup of the <tt>.wtb</tt> file to another location, e.g. network drive or removable media like an USB stick. You can choose an automatic backup interval between 1 and 120 minutes. If a backup fails, you are prompted if you wish to disable the backup.<br />
<br />
Optionally a different (time-stamped) filename will be used for every new backup file (actually a good idea for backing up to a network drive!). <br />
<br />
If the option "Always notify..." is ticked, an informal message will be displayed at the bottom of the screen after a backup run has finished. <br />
<br />
For DXpeditions it may be useful to automatically create a Logsearch File with every backup. In this case, tick the corresponding option.<br />
<br />
{{wbox|Note|Contrary to the WTB backup, the LogSearch exports are not done in a separate background thread. Thus, it is not recommended to enable this option on a running station because WT will be unavailable for logging for a while every time an export is in progress.}}<br />
<br />
[[Image:AutomaticBackup.PNG|center|frame|Setting up Automatic Backup]]<br />
<br />
Here is some additional advice:<br />
<br />
* Backups are processed in a separate thread, meaning that you will not even notice that a backup is in progress! No slowdown, no keyboard blocking etc...<br />
<br />
* Of course, it makes sense to backup to a different volume than your "working" drive. This avoids loss of everything if your hard disk fails. Do not smile... It happens, sometimes! (ARRL SSB 2002 FY5KE, IIRC!)<br />
<br />
* Once you entered the last QSO, for safety, generate your Cabrillo log(s) before exiting. A simple "MAKELOG" command opens the appropriate dialog.<br />
<br />
* In all cases, always make a copy of a file when you want to use/test/modify it. Always keep a backup, never use the original! If you have FTP access somewhere, copy the file there as soon as possible! If your computer crashes, you still will have a safe copy.<br />
<br />
Call me paranoid, but believe me, you need to loose some day a '''very''' big chunk of data to understand the importance of backups!<br />
<br />
==Disable log synchronization on network==<br />
<code>Options | Disable log synchronization on network</code>'''<br><br />
If checked, automatic log synchronization over the network (in multi/op environments) is disabled. May be useful under certain circumstances. See [[Multi-op/Clearing_all_logs_before_the_start|Clearing all logs before the start]].<br />
<br />
==CW==<br />
<code>Options | CW</code><br><br />
This menu item allows you to control different aspects of CW operation. It is enabled only when the selected operating mode is CW (otherwise it is greyed out).<br />
<br />
<br />
[[Image:CWSerialNumberAbbreviation.PNG|center|frame|CW Options submenus]]<br />
<br />
===No sound===<br />
<code>Options | CW | No sound</code><br><br />
If checked, no CW sound will be played through the internal speaker. This option is also available through the '''<tt>SOUND/NOSOUND</tt>''' text commands.<br />
<br />
====Note for some new Laptops====<br />
<br />
In some new generation Laptops, it is necessary to enable the PC Speaker in the BIOS to have it to work properly.<br />
<br />
Moreover, with some Sound systems, you have also to enable the PC Speaker in the "Volume Control".<br />
Here is how to do it:<br />
<br />
* Double click on the Speaker icon in the system tray<br />
* In the menu, select <code>Options | Properties</code>, and search for the PC Speaker Volume Control and enable it<br />
* Set the Volume slider to the appropriate sound level<br />
<br />
Unfortunately, some newer Laptops do not support the PC Speaker "beep" at all anymore... :(<br />
<br />
===Initial Speed===<br />
<code>Options | CW | Initial Speed</code><br><br />
Sets the initial CW speed for new files.<br />
<br />
===Modify standard messages...===<br />
<code>Options | CW | Modify standard messages...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>MESSAGES</tt>''' or '''<tt>MSGS</tt>'''.<br><br />
The place to change the CW messages, both for Run and S&P mode. See [[Menu:Tools#Enable_Run.2FS.26P_switching|Enable Run/S&P Switching]].<br />
<br />
[[Image:CwStandardMessages.png|center|frame|Modifying CW messages; you may also edit the memories one by one using '''<tt>Shift+F1</tt>''', '''<tt>Shift+F2</tt>''' etc. ]]<br />
<br />
Please have a look at the list of [[Message_variables|message variables]] you can use in the CW memories to control different aspects of the operation.<br />
<br />
The Options tab of this window lets you redefine the $QSOB4 macro. The only variable that can be used in this field is $MYCALL, e.g. "QSO $MYCALL TEST".<br />
<br />
[[Image:CwStandardMessagesOptions.png|center|frame|CW messages options.]]<br />
<br />
Check '''Only use RUN Messages (ignore S&P Messages)''' to force Win-Test to use only one set of CW messages, regardless of operating mode.<br />
====Sprint Exchange Logic====<br />
Use '''Sprint Exchange Logic for the Insert key''' to signal to a listening station that you will take over the frequency after a QSO, by signing your call at the end of the exchange. When checked, pressing '''<tt>[Insert]</tt>''' sends the "Run Message" if the logged serial number field is blank, otherwise it sends the "Search & Pounce Message". This option only applies to the Sprint contests. It is ignored for other contests, so it may be left checked all the time.<br />
<br />
Here is example of how to set up the CW messages for the NA Sprint, with Sprint Exchange Logic enabled. Note the programming of the '''<tt>[Insert]</tt>''' message:<br />
<br />
[[Image:NA_Sprint_Messages.PNG|center|frame|Sample CW messages to be used for the NA Sprint, with Sprint Exchange Logic]]<br />
<br />
===Modify additional messages...===<br />
<code>Options | CW | Modify additional messages...</code><br><br />
The place to create or modify additional CW messages which can be accessed using '''<tt>Alt-C</tt>'''. These memories can be used for transmitting QSL information, special greetings, QSY/sked information. It also defines the macros $MSG1 to $MSG12 that may optionally be used as part of any standard CW message.<br />
<br />
[[Image:cw-additional-messages.png|center|frame|Additional CW messages that may be used occasionally like QSL info etc.]]<br />
<br />
===Modify WAE messages...===<br />
<code>Options | CW | Modify WAE messages...</code><br><br />
This function allows you to define CW message text which is available during transmit/receive of QTC traffic. The QTC<br />
window is specific to the WAE DX Contest and can be opened using '''<tt>ctrl-L</tt>''' (transmit QTCs) or <br />
'''<tt>Alt-L</tt>''' (receive QTCs). For more details of WAEDC, please see [[WAEDC]].<br />
<br />
[[Image:WaeMessagesTx.png|center|frame|Additional messages (transmit) for QTC handling in the Worked All Europe DX Contest.]]<br />
[[Image:WaeMessagesRx.png|center|frame|Additional messages (receive) for QTC handling in the Worked All Europe DX Contest.]]<br />
<br />
===Custom variables...===<br />
<code>Options | CW | Custom variables...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>VARIABLES</tt>'''.<br><br />
[[Image:OptionsCWCustomVariables.PNG|center|frame|Custom message variables for DXpeditions or other purposes]]<br />
Mainly useful for DXPeditions, this feature allows you to create custom variables to be used in CW or RTTY messages.<br />
<br />
To define a new variable, double-click on the variable name or the words '''Not defined''', and follow the prompts. All variables can be used in CW or RTTY messages, (one common set of custom variables is used regardless of mode).<br />
<br />
For example, define [Plus] as<br />
'''$CORRECT TU $MYCALL $REGION$UP $CR'''<br />
then change the value of $REGION as required by typing REGION [Enter] in the callsign field of the main logging window and following the prompts.<br />
<br />
To rename a message variable, double-click on its name, and follow the prompts. To delete a message variable, rename it to an empty string.<br />
<br />
{{wbox|WARNING|Don't try to add a variable name that is already used by Win-Test or it won't work.}}<br />
<br />
===Serial number===<br />
<code>Options | CW | Serial number</code><br><br />
Equivalent [[Text_commands#CW_Functions|text commands]] are '''<tt>LZ</tt>, <tt>NOLZ</tt>, <tt>NOABBREV</tt>, <tt>SEMIABBREV</tt>, <tt>FULLABBREV</tt>''' and '''<tt>PROABBREV</tt>'''.<br><br />
<br />
'''Leading zeros''' - If checked, leading zeros for all serial numbers below 100 will be sent by Win-Test ([[Text_commands#CW_Functions|text commands]] '''<tt>LZ</tt>''' and '''<tt>NOLZ</tt>''')<br />
<br />
There are 5 possible abbreviation levels for the serial numbers:<br />
<br />
* '''Not abbreviated''' - all numbers are sent without any abbreviations or "cut numbers" ('''<tt>NOABBREV</tt>''')<br />
* '''Half abbreviated''' - only leading zeros are shortened to "T" ('''<tt>SEMIABBREV</tt>''')<br />
* '''Abbreviated''' - The 0 and the 9 are shortened to "T" and "N" ('''<tt>FULLABBREV</tt>''')<br />
* '''Pro''' - The 0, 1, 4, 5 and 9 are shortened to "T", "A", "V", "E" and "N" ('''<tt>PROABBREV</tt>''')<br />
* '''Custom''' - use the settings in the custom table. Each number can be shortened to a letter of your own choosing.<br />
<br />
'''Custom table...''' - displays the dialog shown below:<br />
[[Image:CWSerialNumberCustomTable.PNG|center|frame|Customized abbreviations for sending CW serial numbers sent by Win-Test. 0, 1, and 9 are shortened to "T", "A", and "N", but only leading zeros are abbreviated.]]<br />
This option only affects '''''serial numbers''''', not numbers within callsigns.<br />
<br />
===Correction===<br />
<code>Options | CW | Correction</code><br><br />
Equivalent to the [[Text commands#List of Text Commands|text commands]] '''<tt>CORRECT</tt>''' and '''<tt>NOCORRECT</tt>'''.<br> <br />
Controls the value of the '''<tt>$CORRECT</tt>''' [[Message_variables|message variable]]. When enabled, Win-Test automatically sends a call correction if the callsign sent ('''<tt>$LOGGEDCALL</tt>''') by the ['''<tt>Ins</tt>'''] key is changed before you press ['''<tt>+</tt>'''] to log the QSO. This is most useful when the ['''<tt>+</tt>'''] key is programmed with '''<tt>$CORRECT TU $MYCALL $CR</tt>''' or similar. '''<tt>NOCORRECT</tt>''' disables the feature.<br />
<br />
When "Smart correction" is enabled ([[Text_commands#List_of_Text_Commands|text command]]: '''<tt>SMART</tt>'''), Win-Test resends only what needs to be sent (prefix, suffix, or full call). When disabled ('''<tt>NOSMART</tt>'''), Win-Test sends the full callsign for all corrections .<br />
<br />
===Shortened spaces (CT spaces)===<br />
<code>Options | CW | Shortened spaces (CT spaces)</code><br><br />
Equivalent to the [[Text commands#List of Text Commands|text commands]] '''<tt>CTSPACE</tt>''' and '''<tt>NOCTSPACE</tt>'''.<br> <br />
The standard spacing between CW words is 7 dits length, instead of 6 (known as "CT space"). With this option you can set it back to 6 dits if you want, achieving slightly shorter spacing between words.<br />
<br />
===Auto sending...===<br />
<code>Options | CW | Auto sending...</code><br><br />
Equivalent to the [[Text_commands#List_of_Text_Commands|text commands]] '''<tt>CWAUTO</tt>''', '''<tt>NOCWAUTO</tt>'''/'''<tt>CWAUTOOFF</tt>''', '''<tt>CWAUTO3</tt>''', and '''<tt>CWAUTO4</tt>'''<br><br />
This lets Win-Test automatically send the ['''<tt>Insert</tt>'''] message as soon as some number of characters are entered in the callsign field, eliminating the need to press the ['''<tt>Ins</tt>'''] key to send an exchange.<br />
<br />
[[Image:OptionsCwAutoSending.png|frame|center|Configuring Auto sending]]<br />
<br />
When CW Auto Sending is enabled, if the cursor is in the callsign field, hitting '''<tt>[Escape]</tt>''' will disable Auto Sending for the current QSO if no CW is being transmitted. When you hit '''<tt>[Escape]</tt>''' during transmit, or when the cursor is not in the callsign field, it stops the current CW transmission, but does not disable the CW Auto Sending setting.<br />
<br />
Detail: If there is a slash character in the callsign, the triggering starts after the slash.<br />
<br />
===Remap keys in keyboard mode===<br />
<code>Options | CW | Remap keys in keyboard mode</code><br><br />
If you have remapped certain keys using the [[Menu:Tools#Redefine_keyboard_keys|Redefine keyboard keys]] dialog or the '''<tt>DEFINEKEYS</tt>''' text command, these mappings are ignored when in [[Menu:Commands#Keyboard_mode|keyboard mode]] '''<tt>[Alt-K]</tt>'''. So for example, if you have redefined the backslash key '''<tt>[\]</tt>''' to send your callsign, or the semicolon key '''<tt>[;]</tt>''' as an alternative to the plus key '''<tt>[+]</tt>''', those keys will not work the same when you are in keyboard mode. Check this option to have these remapped keys work consistently, whether you are in keyboard mode or not.<br />
<br />
==RTTY==<br />
<code>Options | RTTY</code><br><br />
This menu item allows you to setup the standard and additional messages for RTTY operation. It is enabled only when the selected operating mode is RTTY. (otherwise it is greyed out)<br />
<br />
===Modify standard messages...===<br />
<code>Options | RTTY | Modify standard messages...</code><br><br />
The place to change the RTTY messages. <br />
<br />
[[Image:OptionsRttyStandardMessages.PNG|center|frame|Modifying RTTY standard messages; you may also edit them one by one using '''<tt>Shift+F1</tt>''', '''<tt>Shift+F2</tt>''' etc. ]]<br />
<br />
Please have a look at the list of [[Message_variables|Message Variables]] you can use in the RTTY memories to control different aspects of the operation.<br />
<br />
The Options tab of this window lets you redefine the $QSOB4 macro. The only variable that can be used in this field is $MYCALL, e.g. "QSO QRZ $MYCALL".<br />
<br />
[[Image:RttyStandardMessagesOptions.PNG|center|frame|RTTY messages options.]]<br />
<br />
Check '''Only use RUN Messages (ignore S&P Messages)''' to force Win-Test to use only one set of RTTY messages, regardless of operating mode.<br />
<br />
===Modify additional messages...===<br />
<code>Options | RTTY | Modify additional messages...</code><br><br />
The place to create or modify additional RTTY messages which can be accessed using '''<tt>Alt-C</tt>'''. These memories can be used for transmitting QSL information, special greetings, QSY/sked information, ...<br />
<br />
[[Image:OptionsRttyAdditionalMessages.PNG|center|frame|Additional RTTY messages that may be used occasionally like QSL info, greetings, etc.]]<br />
<br />
[[Message_variables|Message Variables]] can also be used within these additional messages.<br />
<br />
===Modify WAE messages...===<br />
<code>Options | RTTY | Modify WAE messages...</code><br><br />
This function allows you to define RTTY message texts which are available during transmit/receive of QTC traffic. The QTC<br />
window is specific to the WAE DX Contest and can be opened using '''<tt>Ctrl-L</tt>''' (transmit QTCs) or <br />
'''<tt>Alt-L</tt>''' (receive QTCs). For more details of WAEDC, please see [[WAEDC]].<br />
<br />
[[Image:WaeMessagesTx.png|center|frame|Additional messages (transmit) for QTC handling in the Worked All Europe DX Contest.]]<br />
[[Image:WaeMessagesRx.png|center|frame|Additional messages (receive) for QTC handling in the Worked All Europe DX Contest.]]<br />
<br />
===Custom variables...===<br />
<code>Options | RTTY | Custom variables...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>VARIABLES</tt>'''.<br><br />
<br />
See [[Menu:Options#Custom_variables...|Options | CW | Custom variables...]]<br />
<br />
==Configure interfaces...==<br />
<code>Options | Configure interfaces...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>SETUP</tt>'''.<br><br />
All the interfaces you wish to use with Win-Test can be parametered by using this dialog box.<br />
<br />
[[Image:Configure-interfaces.png|frame|center|Interface Configuration]]<br />
<br />
===Serial Ports===<br />
The serial ports can be used for an RS-232 network (rarely used now), for a connection to a packet radio controller (also rarely used), for CW or PTT on/off keying output, for headphone audio control, for SO2R active radio control, or for an RS-232 (serial) radio, amplifier, SO2R box, or Winkey interface.<br />
<br />
If using a radio or amplifier interface, you must first specify what model you are using. Press the '''Default Settings''' button to configure all serial port settings to the standard defaults for the selected radio model or Winkey (highly recommended).<br />
<br />
If using an SO2R box, you can control it via serial commands (device type = microHAM, EZMaster, or OTRSP), or you can set the device type to "Other device" and use on/off activation of the DTR and RTS pins to control the SO2R box via "Classic Auto Control" hardware instead of via software commands.<br />
<br />
Use the serial port configuration dialog to select the appropriate settings:<br />
[[Image:com1-properties.png|frame|center|Serial port configuration]]<br />
The '''DTR''' (pin 4) and '''RTS''' (pin 7) options are:<br />
* Handshake - RS-232 hardware handshake, supported by some radios<br />
* CW - For on/off CW keying of Radio 1, Radio 2, or both, similar to LPT port CW keying. The convention is to use for DTR for CW and RTS (optionally) for PTT.<br />
* PTT - For activating PTT on Radio 1, Radio 2, or both, when a CW or internal DVK message is sent.<br />
* Always ON - Pin is always set "high" (required by some USB-to-Serial adapters and radios)<br />
* Always OFF - Pin is always set "low"<br />
* Active radio - Pin is connected to an SO2R box "Swap TX radio" line.<br />
* Stereo RX Audio - Pin is connected to an SO2R box "Stereo on/off" line.<br />
* Headphone control - Pin is connected to an SO2R box "Swap RX radio" line.<br />
<br />
The '''Active with''' option is only available when PTT or CW is selected for DTR or RTS, otherwise it is grayed out.<br />
* Radio 1 - PTT and CW is only sent when Radio 1 is active<br />
* Radio 2 - PTT and CW is only sent when Radio 2 is active<br />
* Both radios - PTT and CW is sent when either radio is active (external steering via SO2R box required)<br />
<br />
{{wbox|Note|The pin numbering applies to a standard DB9 connector.}}<br />
<br />
===Transceivers===<br />
This region of the interfaces configuration window lets you select the type of transceiver for radio 1 and 2 plus various settings like polling, polling rate (actually, delay before polling the radio again after the previous sequence) and if the ICOM specific CI-V feature is to be used or not. By the way, when you use an ICOM radio with an address different from factory settings, please see [http://docs.win-test.com/wiki/WT.INI WT.INI]<br />
<br />
===Printer Ports===<br />
A parallel port can be used to send CW and other signals from Win-Test via [[Interfaces#LPT-port_CW_keying|legacy keying interfaces]], or the microHAM MK2R/MK2R+ operating in "Classic Auto Control" mode. Press '''<tt>[Configure...]</tt>''' to display the following dialog box:<br />
<br />
[[Image:lpt1-properties.png|frame|center|Parallel port configuration showing pin 14 used for TX Radio, Pin 9 for Stereo On/Off, and Pin 4 for RX Radio, Pin 17 for CW, and Pin 16 for PTT]]<br />
<br />
Specify the address of your printer port in hex. Common values are '''<tt>378</tt>''' and '''<tt>3BC</tt>'''. To determine the address used by your printer port, open the Windows Device Manager (Start, Control Panel, System, Hardware tab, Device Manager; or Start, Run, '''<code>devmgmt.msc</code>'''). Select Ports (COM & LPT), Printer Port (LPT1), Right Click, Properties, and finally, click the Resources Tab. You will see '''<code>I/O range 0378 - 037A</code>''' or similar. Use the first address as your port address. If you do not specify the correct port address, Win-Test will appear to operate normally, but it will not key the radio at all.<br />
<br />
===CW===<br />
<tt>PTT ON Delay</tt> specifies the time delay between first PTT closure and first CW output. When using an amplifier with a slow relay, this setting allows you to close the relay line well before RF is applied, which prevents the first dot or dash sent by Win-Test from being truncated. The delay between the PTT command and the effective CW transmission is adjustable between 0 (for QSK amps) to 1000 ms.<br />
<br />
===Ethernet===<br />
The Ethernet interface is used by the Win-Test's local area network, in a multi-operating environment. If needed, you can change the broadcast address and the port number used. If you ignore the meaning of these terms, note that there should normally be no need to modify the default values given by Win-Test. See [[Networking]] for more information.<br />
<br />
===Network Protocol Advanced Settings===<br />
Under the Network Protocol Advanced Settings dialog you will find a way to restrict network traffic in very specific ways. '''CAUTION''': Modifications to the default settings must be done with extreme care. It is intended for very particular configurations and purposes, mainly used by expert users. You are on your own!<br />
<br />
[[Image:NetworkProtocolAdvancedSettings.png|frame|center|Network Protocol Advanced Settings allows you to fine-tune your network traffic]]<br />
<br />
Some pre-set typical configurations are available:<br />
<br />
* Silent time master: Can be used if the computer is used ''only'' to distribute an accurate clock. This PC will not appear in the status window of any other networked computer. Note that with this setting, no QSOs will be recorded on (or sent from) any machine with this setting.<br />
<br />
* Silent backup: Can be used if the computer is ''only'' used for backup purposes. This PC will not appear in the status window of any other networked computer. <br />
<br />
* Packet sharing only: Can be used if stations are networked with different callsigns, and do not want a common log, but do want to share a common packet stream. It can be used for several co-located single-op stations on VHF/UHF, for example.<br />
<br />
* Silent log rebuilding: Can be used if you need to rebuild from scratch a complete log from networked stations, without appearing in the status window of any other networked computer.<br />
<br />
Note that in all settings, the station will still be visible in the network via the [[Text_commands#Multi_Operating|'''<tt>INVENTORY</tt>''']] command.<br />
<br />
[x] This station is a WAN bridgehead<br />
<br />
This feature only works with the wtTunnel suite. To respect multi-op ethics, the wtTunnel package is ''only'' available for headquarters stations during the IARU HF contest. Check this box to restrict the synchronization of QSO inventories to the local network to reduce network traffic when stations are at different sites on a wide area network (WAN).<br />
<br />
See [[Networking#The_Bridgehead_Concept|The Bridgehead Concept]] for further details.<br />
<br />
===Voice Keyer===<br />
At last, if your computer has an embedded sound card, you can select and use it as a digital voice keyer by checking the appropriate box.<br />
<br />
If you want to use a third-party software to record or modify voice messages, be sure to use the following file format : WAV, PCM, 8000 Hz sampling frequency, 1 channel (mono) and 16 bits per sample.<br />
<br />
==WinKey configuration...==<br />
<code>Options | Winkey configuration...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>WKSETUP</tt>'''.<br><br />
<br />
[[Image:WinkeyProperties.png|frame|center|Configuring the WinKey properties]]<br />
<br />
* '''Keying mode''':<br />
** '''Iambic A''' - Curtis A iambic timing<br />
** '''Iambic B''' - Curtis B iambic timing<br />
** '''Ultimatic''' - Non iambic mode<br />
** '''Bug (semi-automatic)''' - WinKey makes the dits and you make the dahs<br />
In either iambic mode, alternating dits and dahs are sent while both paddles are held closed. In mode B, an extra alternate dit or dah is sent after both paddles are released. In Ultimatic mode, when both paddles are pressed, the keyer will send a continuous stream of whichever paddle was last pressed.<br />
<br />
* '''Second Output (pin 5)''' (WinKey only, ignored by WinKey2 chip)<br />
** '''PTT''' - WinKey pin 5 acts as a PTT line<br />
** '''Sidetone frequency''' - WinKey pin 5 acts as a sidetone output<br />
** '''Radio 2''' - WinKey pin 5 keys a second radio<br />
* '''Sidetone Frequency''' - sets WinKey oscillator sidetone on pin 5 (ignored by WinKey2 chip)<br />
* '''Short spaces (CT spaces)''' - WinKey generates a 6-baud word space instead of a 7-baud space (1 baud = length of one dit)<br />
* '''Paddle watchdog''' - disable the key output after 128 consecutive dits or dahs. This is to guard against the paddles being accidentally keyed continuously by your cat.<br />
* '''Autospaces''' - If you pause for more than one dit time between a dit or dah, Winkey will interpret this as a letter-space and will not send the next dit or dah until a full letter-space time (3 dits) has passed<br />
* '''Swap paddles''' - reverse the dit/dah paddles (e.g. for keying with the left hand)<br />
* '''PTT'''<br />
** '''PTT Lead(ms)''' specify PTT lead (switch to transmit before CW begins)<br />
** '''PTT Tail(ms)''' specify PTT tail (keep transmitter up after CW has finished)<br />
** V2 of WinKey provides additional features:<br />
*** PTT tail control (fixed, 1.00 letter space, 1.33, 1.66, 2.00)<br />
* '''CW Message and paddle speeds'''<br />
** '''Independent''' - CW speed sent by the paddle is controlled by the WinKey speed knob, and CW speed set by Win-Test is controlled indpendently by the Win-Test keyboard commands ('''<tt>[Alt-F9]</tt>''', '''<tt>[Alt-F10]</tt>''', and '''<tt>[Alt-V]</tt>'''). In addition, both CW speeds will be displayed at the bottom of the [[Menu:Windows#Rate|Rate Window]].<br />
** '''Synchronized''' - Win-Test will keep the CW speed synchronized, whether sent by paddles or by Win-Test<br />
*** '''Only by WinKey pot''' - Only the WinKey speed knob will control CW speed; Win-Test speed commands sent via the keyboard are ignored.<br />
*** '''Only by the Win-Test commands (Alt-V/F9/F10)''' - The WinKey speed knob is ignored and CW speed changes may only be controlled by the Win-Test keyboard commands ('''<tt>[Alt-F9]</tt>''', '''<tt>[Alt-F10]</tt>''', and '''<tt>[Alt-V]</tt>''').<br />
*** '''By both (not recommended)''' - CW speed may be controlled by either the WinKey speed knob or by Win-Test keyboard commands, but this setting is not recommended as there is no way to automatically turn the WinKey speed knob to match the CW speed set by Win-Test.<br />
<br />
==EZMaster configuration...==<br />
<code>Options | EZMaster configuration...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>EZSETUP</tt>'''.<br><br />
<br />
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port.<br />
<br />
This menu option enables the user to configure five different option for EZMaster to work with Win-test:<br />
<br />
===CW Keyer===<br />
Internal EZMaster CW Keyer (tick Enable WinKey Box) or Win-Test keyer (do not tick box).<br />
<br />
<br />
===Radio set-up===<br />
In the image below find configuration for FT1000MP<br />
<br />
<br />
===Packet-Radio TNC===<br />
<br />
<br />
===Antenna configuration according to RX/TX===<br />
<br />
<br />
<br />
[[Image:Ezmaster.PNG|center|frame|EZMaster configuration window]]<br />
<br />
==MK/MKII/MK2R/u2R configuration...==<br />
<code>Options | MK/MKII/MK2R/u2R configuration...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>MKSETUP</tt>'''.<br><br />
This option allows you to configure the microHAM devices microHAM Keyer, microHAM Keyer 2 and MK2R SO2R device.<br />
It lets you select if the microHAM protocol should be used for communication with the device.<br />
Moreover, you can specify, which pins on the ACC connected of the device will be activated, when the radio1 or radio 2 is tuned to a specific band. <br />
<br />
[[Image:MK_MKII_MK2R.PNG|center|frame|microHAM MK, MKII and MK2R configuration window]]<br />
<br />
When an attached footswitch is used, two dedicated Lua scripts named '''<tt>microhamFsOn.wts</tt>''' and '''<tt>microhamFsOff.wts</tt>''' (not case-sensitive) are called. '''<tt>wtArg</tt>''' is set the radio number of the footswitch (0 for MK/MKII - 0 or 1 for MK2R/MK2R+/u2R depending on the footswitch that generated the event).<br />
<br />
==OTRSP configuration...==<br />
<code>Options | OTRSP configuration...</code><br><br />
This option allows you to set up an Open Two Radio Switching Protocol (OTRSP) compatible <br />
device like the YCCC SO2R Box (for more information, visit http://www.k1xm.org/OTRSP).<br />
<br />
[[Image:OTSRP.PNG|center|frame|OTRSP configuration window]]<br />
<br />
If the OTRSP device has controls and if they can generate events, dedicated Lua scripts are called when events occur :<br />
<br />
* '''<tt>otrspCrOn.wts</tt>''' and '''<tt>otrspCrOff.wts</tt>''' (not case-sensitive) are called when such a control has values 1 and 0 respectively. '''<tt>wtArg</tt>''' is set to the control number (0 to 9).<br />
* '''<tt>otrspCrEvent.wts</tt>''' (not case-sensitive) is called for all states of the events. '''<tt>wtArg</tt>''' is set to (256 * cr) + state (cr = control number - 1 to 9, and state = value of the state when the event occured - 0 to 255).<br />
<br />
{{wbox|Note|If the PTT events are used, the control 0 is restricted to this usage, and doesn't fire the otrspCrOn/Off/Event.wts scripts. If the PTT events are not used, otrspCrEvent is not called when an event on this control occurs. Only the otrspCrOn/Off scripts are executed in this case.}}<br />
<br />
==RTTY configuration...==<br />
<code>Options | RTTY configuration...</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>RTTYSETUP</tt>'''.<br><br />
This menu entry opens the control box for [[RTTY|RTTY configuration]].<br />
<br />
[[Image:OptionsRttyConfiguration.PNG|frame|center|RTTY Configuration Box]]<br />
<br />
Please refer to the [[RTTY|RTTY chapter]] for all the details.<br />
<br />
==Frequency Offsets==<br />
This function is mainly used for a VHF/UHF/SHF setup involving a transverter. An HF radio tuned on 28 MHz is used as the user front-end which drives the transverter for 144 MHz or 432 MHz. Or a 144 MHz transceiver is used to drive a transverter to 5.7 and 10 GHz.<br />
<br />
The point is that Win-Test only sees the frequency of the front-end. For example it would find the radio tuned to 28 MHz and simply ignore its frequency read-out when set up for a VHF/UHF contest. Likewise, the radio would ignore commands to tune to 144.054 from Win-Test because it is a HF transceiver that only knows 1.8-30 MHz. This is where the frequency offset feature comes in handy. It allows you to specify a frequency (in kHz) that will be added to any frequency read from the radio and subtracted from any frequency command that goes to the radio. <br />
<br />
In other words, assume the frequency offset is set at 116000 kHz. The radio is tuned to 28054 kHz. Now Win-Test "sees" the radio at 144054 kHz, because the offset is added. Likewise, when the user clicks on a packet spot on 144088, Win-Test sends the radio to 28088 because the offset is subtracted.<br />
<br />
This way, Win-Test gives you great flexibility to enter one offset per band per radio.<br />
<br />
[[Image:OptionsFrequencyOffsets.png|center|frame|Frequency Offset allows you to use a transverter with Win-Test]]<br />
<br />
==MP3 Configuration==<br />
<code>Options | MP3 Configuration</code><br><br />
For quick access to this dialog, use the [[Text commands|text command]] '''<tt>MP3SETUP</tt>'''.<br><br />
<br />
Allows you to select the sound device used for recording and playbyck in use with the contest recorder.<br />
<br />
You must have installed a MP3 ACM Codec (e.g. LAME, Fraunhofer). The encoder is not part of the Win-Test distribution. Download LAME from http://www.free-codecs.com/LAME_ACM_Codec_download.htm. See http://lists.f5mzn.org/pipermail/support/2010-January/079240.html for LAME installation instructions.<br />
<br />
There may already be an encoder on your system due to other software previously installed, like the Fraunhofer IIS MPEG Layer-3 Codec.<br />
<br />
The default settings (Stereo/8000 Hz sample rate, 24 kBit/s bitrate) will produce a file of about 500 MB in size for an 48h contest.<br />
<br />
[[Image:OptionsMP3Configuration.PNG|frame|center|Display options for MP3/Contest Recorder configuration.]]<br />
<br />
To make your MP3 recordings available on the Internet after the contest, see:<br />
http://lists.f5mzn.org/pipermail/support/2009-December/078951.html<br />
<br />
==Script Editor Configuration==<br />
This menu lets you configure the application to start when clicking the Edit button in the [[Menu:Tools#Scripts_Manager|Scripts Manager]]. Basically, every ASCII editor is usable, SciTE is the recommended editor as it provides syntax highlighting.<br />
<br />
[[Image:OptionsScriptEditorConfiguration.PNG|frame|center|Configure the preferred editor to manage Lua scripts from within Win-Test]]<br />
<br />
==Log==<br />
<code>Options | Log</code><br><br />
Allows you to change the display of the log entry area (the last 9 QSOs plus the current QSO entry line), including the Win-Test background color. You may select font size, colors, headings and so on.<br />
<br />
[[Image:OptionsLog.PNG|frame|center|Display options for the log entry area.]]<br />
<br />
===Fonts===<br />
Select the text font for the log entry area<br />
<br />
===Headers===<br />
Controls the display of the column titles in the log entry area. The headers may be hidden, left aligned, or centered<br />
<br />
===Hide QSO numbers===<br />
Hides the first column in the log entry area, to avoid confusion with the serial number sent, especially for multi-op entrants.<br />
<br />
===Colors...===<br />
Use this option to change the background color for the entire screen, the color of the logging text, the header text, or the warning message text. Press the '''<tt>[Factory colors]</tt>''' button to restore these to the Win-Test default colors.<br />
<br />
===Stay in field when moving up and down in the log===<br />
Select this option to the have the cursor move up and down as it would in a spreadsheet. For example, to stay in the report field when pressing the '''<tt>[Up]</tt>''' or '''<tt>[Down]</tt>''' cursor keys, instead of having the cursor jump to the beginning of the callsign field.<br />
<br />
===New Contest Files Properties===<br />
This window lets you define a directory structure and file name template for newly created contest log files. This is a nice feature to keep contest files including MP3 recordings etc. well organised.<br />
<br />
[[Image:OptionsLogNewContestFileProperties.PNG|center|frame|New Contest File Properties dialog]]<br />
<br />
The following macros may be used to specify the file name.<br />
<br />
%C = Contest name<br />
%I = Log callsign (slash substituted by hyphen)<br />
%L = Log callsign (slash substituted by underscore)<br />
%M = Mode<br />
%m = Month (2 digits)<br />
%N = Month name (long)<br />
%n = Month name (abbrev)<br />
%S = Station name<br />
%Y = Year (4 digits)<br />
%y = Year (2 digits)<br />
<br />
==DXpedition Info Field==<br />
<code>Options | DXpedition Info Field</code><br><br />
This submenu allows you to configure some options regarding the use of Win-Test on a DXpedition. It is only visible if you have selected the contest type DXpedition.<br />
<br />
[[Image:DxPeditionOptions.png|frame|center|Options available for DXpedition operation]]<br />
<br />
An info field is available to store up to 13 characters of information with the QSO, e.g. the operator's name, QTH or other information that you wish to keep visible during the QSO. The info field can be accessed with the space bar, the '''[>]''' and '''[<]''' keys or the '''[Tab]''' key. <br />
<br />
[[Image:DxPeditionInfoField.png|frame|center|The DXpedition Info Field can store up to 13 characters. If you don't use space to switch fields, you can also enter a space character like shown above.]]<br />
<br />
==Spot Warnings==<br />
When this option is enabled, the DX cluster spots are briefly displayed (as soon as they arrive), in the line under below the log entry line. You can choose to display only the spots of the current band and/or the new multipliers, as well as your own callsign (good to know when you're being spotted!). And of course you may want to hide dupes and invalid callsigns. <br />
<br />
==DX Cluster==<br />
<code>Options | DX Cluster</code><br><br />
<br />
===DX Cluster window shortcuts===<br />
[[Image:OptionsDxClusterSyntax.png|center|frame|Selecting the syntax of your DX Cluster]]<br />
This option controls the syntax of the DX-cluster node that you are using (DX Spider vs. AK1A, DXNet, etc.), and the count of spots and solar information requested by using the buttons in the [[Menu:Commands#DX-Cluster|DX cluster window]].<br />
<br />
===Start/stop wtDxTelnet automatically===<br />
When wtDxTelnet is installed in the Win-Test directory, this option allows you to start and stop this application from within Win-Test or start and stop it automatically when Win-Test is launched.<br />
<br />
[[Image:OptionsStartStopWtDxTelnet.gif|center|frame|Starting and stopping wtDxTelnet from Win-test]]<br />
<br />
==HamCAP==<br />
<code>Options | HamCAP</code><br><br />
<br />
With this menu option you can configure the way Win-Test will integrate with [http://www.dxatlas.com/HamCAP/ HamCAP] (by VE3NEA).<br><br />
You can select if you want to see immediately the HamCAP window, as soon as you call for it with the shortcut '''<tt>Ctrl-P</tt>''', or if you want it to calculate in background and you will recall the propagation forecast window later.<br />
<br />
[[Image:OptionsHamCapBackground.png|frame|center|Option In Background]]<br />
<br />
It is just a matter of taste and of how big is your monitor screen: if you have plenty of room, maybe you don't care to leave it in background (<b>In background</b> option <b>checked</b>), but in a visible part of the screen, so you don't loose the keyboard focus from the WT main window; otherwise you will see immediately HamCAP (<b>In background</b> option <b>unchecked</b>), and so you'll need to regain the focus with a mouse click.<br />
<br />
[[Image:HamCapForeground.png|frame|center|HamCAP in foreground]]<br />
<br />
Then you need to setup which HamCAP tab you want to see first.<br />
<br />
[[Image:OptionsHamCapTab.png|frame|center|Option In Background]]<br />
<br />
The most useful are the <b>Charts</b> or the <b>Map</b> tab, which are those that give the propagation information, while the others, namely Params, Settings, and Antennas, are useful in the HamCAP itself setup phase.<br />
<br />
See [[HamCAP]] in this manual for more details on the setup phase.<br />
<br />
Then you have to setup in which way HamCAP has to deal with Solar figures (SSN, SFI, A and K indexes).<br><br />
(See [[Menu:Windows#Solar_Activity | Menu Windows Solar_Activity]] in this manual).<br />
<br />
HamCAP has at least three different modes of operation:<br />
* stand-alone<br />
* in cooperation with [http://www.dxatlas.com/IonoProbe/ IonoProbe] (by VE3NEA)<br />
* feeded by a calling application (Win-Test)<br />
<br />
<br />
[[Image:OptionsHamCapSolar.png|frame|center|Option Solar indexes passing]]<br />
<br />
So, at this time, you should check one of the following options:<br />
* <b>None</b>, if you don't want, or need, Win-Test to pass any data to HamCAP, which will be working in stand-alone mode or in cooperation with IonoProbe;<br />
* <b>WWV only</b>, or <b>WCY only</b>, if you want Win-Test to pass the corresponding Solar figures, if present, to HamCAP;<br />
* <b>All</b>, and then choose <b>Priority</b>, if you want to try to use both figures and Win-Test to pass the prioritized one in case both data are present.<br />
<br><br />
<br />
<br><br />
<br />
==WAEDC==<br />
<code>Options | WAEDC</code><br><br />
Special option for the [http://www.waedc.de/ Worked All Europe DX Contest]. This menu item is only visible when WAEDC Contest is selected.<br />
<br />
For more information about Win-Test and WAEDC see [[WAEDC]].<br />
<br />
==Data files==<br />
<code>Options | Data Files</code><br><br />
<br />
Through this section you will be enabled to select four more different options in the pop-up menu as shown in the following picture.<br />
<br />
[[Image:OptionsDataFiles.png|center|frame|Selecting Options Data files section]]<br />
<br />
<br />
<br />
===Country files...===<br />
<code>Options | Data Files | Country files...</code><br><br />
Text command shortcut: <code>COUNTRYFILES</code><br />
<br />
This dialog controls which country file to use to identify multipliers. It is also used to calculate and pre-fill ITU and CQ Zones from country prefixes. There are three files to select from.<br />
<br />
[[Image:WindowsSelectCty.png|center|frame|Selecting the appropriate CTY file]]<br />
<br />
Selecting '''CTY_WT_MOD.DAT''' usually gives the most accurate results if you download the latest version. For a description of each file, see [[Other_Files|Other Files]].<br />
<br />
You can start an immediate download from the Win-Test web site by selecting a file and clicking the '''Download''' button. After pressing '''OK''', you will be prompted if you want to reload and re-score the log based on the updated country file.<br />
<br />
===Default extra data files...===<br />
<code>Options | Data Files | Default extra data files...</code><br><br />
This option will allow to select which EXTRA files WT will use to show specific information (like operator's name, IOTA references, club member names, etc.) in the Extra Information window (see [[Menu:Windows#Extra_Information | Menu:Windows Extra Information]] for more details).<br />
When selecting this option a window will pop-up where you can check the files you need. You can see an example in the following picture.<br />
<br />
[[Image:DataFilesExtra.png|center|frame|Selecting the Extra data files]]<br />
<br />
===Markers files...===<br />
<code>Options | Data Files | Markers files...</code><br><br />
This option will allow to select which Markers files WT will use to show the relevant information in the BandMap. Please refer to <br />
the description of the band map's [[Menu:Windows#Markers | context menu]] for detailed information on these files.<br />
When selecting this option a window will pop up where you can check the files you wish to display information from. <br />
You can see an example in the following picture.<br />
<br />
[[Image:DataFilesMarkers.png|center|frame|Selecting the Markers files]]<br />
<br />
===Segments files...===<br />
<code>Options | Data Files | Segments files...</code><br><br />
This option will allow to select which segments files WT will use to show the relevant information in the BandMap. Please refer to the description of the band map's [[Menu:Windows#Segments | context menu]] for detailed information on these files.<br />
When selecting this option a window will pop up where you can check the files you wish to activate. You can see an example in the following picture.<br />
<br />
[[Image:DataFilesSegment.png|center|frame|Selecting the Segments files]]<br />
<br />
==Bandplans...==<br />
<code>Options | Bandplans...</code><br><br />
A flexible and powerful band plan management allows you to specify band boundaries on a permanent basis depending on the mode of operation. We all know, that on 40 m CW, the band goes up to 7100; on RTTY, the band goes from well below 7030 to 7100 etc. etc. Since Win-Test tries to filter incoming DX spots by frequency, this is the way to have Win-Test make the correct decision to drop the spot or display it as needed DX.<br />
<br />
[[Image:Bandplans.png|center|frame|The Band Plan Manager window]]<br />
<br />
Different band plans can be saved and re-loaded at a later time. It's smart to create a band plan for SSB, another for CW, yet another one for 160 CW etc.<br />
<br />
==Windows==<br />
<code>Options | Windows</code><br><br />
<br />
[[Image:OptionsWindowsMenu.png|center|frame|Selecting how child windows are displayed]]<br />
<br />
The child windows of the application can either be included in the main Win-Test window, or float anywhere on the screen, thus allowing the Windows desktop or other running software to remain visible. If your video card and operating system support it, you can display Win-Test windows on more than one monitor.<br />
<br />
Win-Test automatically saves the current window layout in the Win-Test binary log file (.wtb) whenever you exit. So, each log file can have a different window layout depending on the contest.<br />
<br />
See [[Positioning_Windows|Positioning Windows]] for more information about how to precisely rearrange the window layout to suit your preferences. <br />
<br />
Once you have a window layout that you like, select <tt>Default layout...</tt> to save it as the default layout that will be used for new Win-Test logs. Win-Test displays the following dialog:<br />
<br />
[[Image:DefaultOpenChildWindows.png|center|frame|Changing the default window layout]]<br />
<br />
Updates to this dialog do ''not'' effect the current log's window layout; they only affect the default window layout to be used for new logs.<br />
<br />
If you press '''<tt>[Use the current layout]</tt>''', Win-Test updates the list box so that it describes the current Window layout. Generally you'll want to press this button first.<br />
<br />
The child windows are listed in the order that they will be ''drawn'', so if two windows overlap, the window listed last will appear "on top" of any windows listed earlier.<br />
<br />
Use the check boxes to indicate which child windows you want displayed by default.<br />
<br />
* '''<tt>[Uppermost]</tt>''' - moves the highlighted child window to the top of the list, so that it will be drawn first, and appear ''beneath'' any windows drawn later.<br />
* '''<tt>[Up]</tt>''' - moves the highlighted child window up one spot in the list<br />
* '''<tt>[Down]</tt>''' - moves the highlighted child window down one spot in the list<br />
* '''<tt>[Downmost]</tt>''' - moves the highlighted child window to the bottom of the list, so that it will be drawn last, and appear ''on top of'' any windows drawn earlier.<br />
* '''<tt>[Factory settings]</tt>''' - restores the default window layout to the Win-Test factory default<br />
* '''<tt>[Use the current layout]</tt>''' - updates the list to describe the child window layout being used by the current log<br />
* '''<tt>[OK]</tt>''' - saves the displayed window list as the new Win-Test default, and closes the dialog. The layout is saved in the [[WT.INI|Win-Test initialization file (wt.ini)]]. Pressing this button has ''no effect'' on the current window layout being used.<br />
* '''<tt>[Cancel]</tt>''' - cancels all changes to the default child window layout and closes the dialog.<br />
<br />
==Toolbar==<br />
<code>Options | Toolbar</code><br><br />
If this option is checked, the Icons toobar is displayed below the menu.<br />
<br />
[[Image:IconsBar.gif|frame|center|Icon toolbar]]<br />
<br />
<br />
Refer to the [[Icon_bar|Icon bar]] chapter for a detailed explanation of all the pictorial symbols.<br />
<br />
==Language==<br />
<code>Options | Language</code><br><br />
It is possible to choose the language of the Win-Test user interface. Currently supported languages are English, French, German, Italian and Spanish. <br />
<br />
[[Image:OptionsLanguageSelection.PNG|frame|center|Selecting the Language]]<br />
<br />
Win-Test has to restart when the language is switched.<br />
<br />
[[Menus|Back to Menus]]</div>DK9TNhttps://docs.win-test.com/w/index.php?title=Database_Files&diff=4178Database Files2011-01-05T09:10:00Z<p>DK9TN: /* Installing */</p>
<hr />
<div>Win-Test has a feature called 'exchange guessing', which aims to fill in the exchange for a specific callsign by searching a database of known contesters' callsigns and their usual exchanges in a database file.<br />
<br />
These database files are available from http://download.win-test.com/databases. <br />
<br />
==Installing a Database file==<br />
<br />
===Downloading===<br />
Win-Test database files come in a binary format (.DTB). The Win-Test Team provides several of these files at http://download.win-test.com/databases. Look for the .DTB or .ZIP files (larger database files are collected in .ZIP archives).<br />
<br />
Here is a - possibly incomplete - list of the database files available and for which contests they are being used.<br />
<br />
AGCW_HNY.DTB AGCW Happy New Year contest<br />
ARI.DTB ARI 40/80 contest<br />
ARIDX.DTB ARI DX Contest (DX side)<br />
ARI_SEZIONI.DTB ARI Sezioni Contest<br />
ARRL_160_DX.DTB ARRL 160 m (contains US stations only)<br />
ARRL_160_USVE.DTB ARRL 160 m (contains US and DX stations)<br />
ARRL-ALL.DTB ARRL 10 m, CQWW 160 m contests, NA Sprint, NCCC Sprint<br />
ARRL-DX.DTB ARRL DX contest (use if you are inside US/VE)<br />
ARRL-USVE.DTB ARRL DX contest (use if you are outside US/VE)<br />
CQIR.DTB CQIR contest<br />
CQWW.DTB CQWW DX, GACW and JIDX contests<br />
EUSPRINT.DTB EU Sprint contest<br />
EU_HF.DTB EU HF contest<br />
FOC_MARATHON.DTB FOC Marathon<br />
HADX.DTB HADX contest<br />
HELVETIA_DX.DTB Helvetia contest (DX side)<br />
HELVETIA_HB.DTB Helvetia contest (HB side)<br />
IARU_HF.DTB IARU HF contest<br />
IOTA.DTB IOTA contest (Islands activities)<br />
KCJ.DTB KCJ (Keyman's Club of Japan) contest<br />
KOS.DTB King Of Spain contest (from 2005)<br />
PACC_DX.DTB PACC contest (DX side)<br />
PACC_PA.DTB PACC contest (PA side)<br />
REFHF.DTB REF HF contest<br />
RSGB.DTB RSGB 160 m and RSGB 21/28 (DX side) contests<br />
RSGB_CMW.DTB RSGB Commonwealth contest (BERU)<br />
SCC.DTB SCC RTTY Championship<br />
SPDX.DTB SP DX contest (DX side)<br />
STEW-PERRY.DTB Stew Perry contest<br />
UBADX.DTB UBA DX contest<br />
UBA_SPRING_DX.DTB UBA Spring contests (DX side)<br />
UBA_SPRING_ON.DTB UBA Spring contests (ON side)<br />
UFT_HF.DTB UFT HF contest<br />
WAG_DL.DTB WAG Contest (DL side), DARC Xmas Contest and DARC 10 M Contest<br />
WAG_DX.DTB WAG Contest (DX side)<br />
YODX.DTB YO DX Contest (DX side)<br />
<br />
For more details, please look at the [http://download.win-test.com/databases/READ_ME.TXT READ_ME.TXT] file in the database site directory.<br />
<br />
===Installing===<br />
After downloading, the corresponding .DTB files need to be copied to the Win-Test 3 installation directory or the the Win-Test 4 application data directory. Zip files have to be unpacked before they can be used (Win-Test will load .DTB files only). <br />
<br />
For Win-Test version 4, save database files in:<br />
* Windows XP: '''C:\Documents and Settings\All Users\Application Data\Win-Test\databases\'''<br />
* Windows Vista and Windows 7: '''C:\ProgramData\Win-Test\databases\'''<br />
<br />
For Win-Test version 3, save database files in:<br />
* '''C:\Program Files\Win-Test\''' (or the Win-Test installation directory)<br />
<br />
See [[Check_Partial_and_Np1_Files#Location|Check Partial and Np1 Files - Location]] for more info. on how to view these often-hidden directories.<br />
<br />
Win-Test will then load automatically, at start-up, the corresponding database file (according to the actual selected contest), if those files are available.<br />
<br />
{{wbox|Warning|If a contest-specific database file such as '''cqww.dtb''' is available, it will also be used by the Check Partial windows ''instead of'' '''master.scp''', which may not be wanted. To override this, use file name '''default.scp''' instead of '''master.scp'''.<br />
}}<br />
<br />
==Exchange Guessing==<br />
Other than the Super Check Partial and N+1 functions in Win-Test, exchange guessing helps the operator to "know what to expect" in the course of a contest QSO. Many contests come with a fixed exchange, be it a county or regional identifier, a QTH locator or a callsign specific identifier. This type of information can be "guessed" by the software so that the operator only has to confirm or correct this information.<br />
<br />
Please note that this feature is different from the Super Check Partial database (MASTER.SCP, DEFAULT.SCP, HF.DTB, VHF.DTB) and also different from the [[Menu:Windows#Extra_Information|Extra data files]] (XDT). See [[Check_Partial_and_Np1_Files|Check Partial and Np1_Files]].<br />
<br />
<br />
===Setting up Exchange Guessing in Win-Test=== <br />
After the database files have been installed, we need to activate the exchange guessing.<br />
<br />
To do this, select '''<tt>Tools | Data entry | Exchange guessing</tt>''' from the Top Menu. <br />
<br />
[[Image:ActivateExchangeGuessing.png|frame|center|Activate Exchange Guessing]]<br />
<br />
<br />
Three options are available:<br />
<br />
* <code>Pressing the spacebar</code> - this will fill in the exchange upon entering a callsign and hitting spacebar to move the entry cursor to the report field. This is the default setting.<br />
* <code>Automatically</code> - this will fill in the exchange as soon as you have entered the last character of the callsign and Win-Test has found an entry for it in the database file. Since this is a more resource intensive operation than the '<tt>Pressing the spacebar</tt>' option, it is not recommended for slow, or low-end, computers.<br />
* <code>After timeout</code> - this option will fill in the exchange after a certain amount of time has elapsed without changes to the callsign.<br />
<br />
<br />
Now, when you enter a callsign in the log entry area, the pre-guessed report will automatically come up. Also, the Check Partial window can show the same information, if it has been enabled by checking the '''<tt>Display exchange</tt>''' option in the context menu.<br />
<br />
<br />
<center><br />
{|<br />
|[[Image:CheckPartialContextMenu.gif|frame|center|The Check Partial Context menu allows you to see pre-guessed report information - this information is in brackets right to the callsign.]]<br />
|[[Image:CheckPartialUsedFilesList.gif|frame|center|Make sure you have loaded the correct version of the DTB file. This window is brought up via the context menu of the Check Partial window by selecting "Used files list...".]]<br />
|}<br />
</center><br />
<br />
Moreover, you can also verify which are the loaded database files through the '''<tt>Used files list...</tt>''' option, in the context menu (see above).<br />
<br />
<br />
Also the Band Map can show the guessed exchange information and highlight the stations accordingly, if the '''<tt>Display options | Exchange</tt>''' has been checked in its context menu.<br />
<br />
<center><br />
{|<br />
|[[Image:ExchangeGuessingBandmap.png|frame|center|Band map with Exchange Guessing enabled]]<br />
|[[Image:BandmapExcGuessEnable.png|frame|center|Exchange Guessing enabling context menu]]<br />
|}<br />
</center><br />
<br />
===A note about Exchange Guessing=== <br />
Exchange guessing is provided as a feature, that is, to assist the operator. It is NOT recommend to be used as a replacement for your ears! <tt>:)</tt>. You should always try to hear the exchange sent from the station you are working as there can be discrepancies in the database files.<br />
<br />
==Brewing your own Database file==<br />
'''Beware:''' This section is for the brave and experienced programmer and power user!<br />
<br />
Win-Test's .DTB files come in a binary format and - by default - are not editable with a simple tool like a text editor or a word processor. Having some programming expertise, you can still sucessfully create/replace an existing .DTB file with your own version. Remember, however, that you can not make Win-Test load a database it doesn't know.<br />
<br />
The file strutcture of the database files is straightforward and simple: As an example, take a look at the first bytes of the WAG_DL.DTB file used for looking up DOKs:<br />
<br />
00000000 44 41 30 41 41 00 00 00 00 00 00 00 00 00 52 31 DA0AA.........R1<br />
00000010 37 00 00 00 00 00 00 00 00 00 44 41 30 42 41 59 7.........DA0BAY<br />
00000020 00 00 00 00 00 00 00 00 42 30 36 00 00 00 00 00 ........B06.....<br />
00000030 00 00 00 00 44 41 30 43 42 00 00 00 00 00 00 00 ....DA0CB.......<br />
00000040 00 00 59 32 34 00 00 00 00 00 00 00 00 00 44 41 ..Y24.........DA<br />
00000050 30 43 57 00 00 00 00 00 00 00 00 00 55 32 33 00 0CW.........U23.<br />
00000060 00 00 00 00 00 00 00 00 44 41 30 44 49 47 00 00 ........DA0DIG..<br />
[...]<br />
<br />
From that hex dump we can see that the file consists of records of equal length of 26 bytes. The callsign is stored as a null-padded string in the first 14 bytes, the corresponding information (the DOK) is contained in the following 12 bytes, also null-padded. <br />
<br />
As another example, let's take a look at the file VHF.DTB, which contains stations active on the VHF/UHF bands and their corresponding QTH locators:<br />
<br />
00000000 34 4E 31 42 00 00 00 00 00 00 00 00 00 00 4B 4E 4N1B..........KN<br />
00000010 30 35 43 52 00 30 31 39 35 00 39 41 31 42 00 00 05CR.0195.9A1B..<br />
00000020 00 00 00 00 00 00 00 00 4A 4E 38 35 4A 58 00 30 ........JN85JX.0<br />
00000030 31 39 35 00 39 41 31 42 20 00 00 00 00 00 00 00 195.9A1B .......<br />
00000040 00 00 4A 4E 38 35 4F 56 00 30 31 39 35 00 39 41 ..JN85OV.0195.9A<br />
00000050 31 43 43 55 00 00 00 00 00 00 00 00 4A 4E 38 35 1CCU........JN85<br />
00000060 4C 49 00 30 31 39 35 00 39 41 31 43 45 51 00 00 LI.0195.9A1CEQ..<br />
[...]<br />
<br />
Here you can basically see the same file structure with the exception that the information field is actually split in two fields, one containing the information to display, and another one which contains information about the content itself - namely when this very piece of information was verified last - here "0195" meaning "January 1995".<br />
<br />
Using a programming environment like Perl, you can create a simple application that will do the job for you. Here is a sample. Please feel free to copy and adapt to your needs.<br />
<br />
The program processes a number of .db plaintext files (line 3). To work around duplicate information (e.g. one station is listed with several different locators), a space character is appended to the callsign (line 11). True duplicates are simply eliminated (line 7).<br />
Once the data collection process is finished, a new .dtb file is created (line 21) and - using Perl's pack() function, the records are created (line 23) and written to the file (line 24). The date information is left at 0195 for simplicity. This could certainly be elaborated to some detail.<br />
<br />
The final product has to be renamed to VHF.DTB before Win-Test will start using it.<br />
<br />
1 #!/usr/bin/perl<br />
2 <br />
3 foreach $f (<*.db>) {<br />
4 open(IN,$f);<br />
5 while(<IN>) {<br />
6 ($c,$q) = split;<br />
7 goto DONE if (length($c) < 1);<br />
8 if (defined($m{$c})) {<br />
9 goto DONE if ($m{$c} eq $q);<br />
10 while (defined($m{$c})) {<br />
11 $c .= ' ';<br />
12 goto DONE if ($m{$c} eq $q);<br />
13 }<br />
14 }<br />
15 $m{$c} = $q;<br />
16 DONE:<br />
17 }<br />
18 close(IN);<br />
19 }<br />
20 <br />
21 open(OUT,"> vhf_new.dtb");<br />
22 foreach (sort keys %m) {<br />
23 $r = pack("a14a6xa4x",$_,$m{$_},"0195");<br />
24 print OUT $r;<br />
25 }<br />
26 close(OUT);<br />
<br />
After all, if you can contribute updated .DTB files of reasonably good quality, the Win-Test team will be happy to incorporate them into their distribution which is available for free on the internet.<br />
<br />
==See also==<br />
Some other methods, to create/update DTB-Files, have been described by F6FVY in the WT Support forum (see: [http://www.f5mzn.org/pipermail/support/2007-January/072867.html http://www.f5mzn.org/pipermail/support/2007-January/072867.html]).<br />
<br />
[[Main Page|Back to Main Page]]</div>DK9TN