Difference between revisions of "SO2R/EZMaster"
Line 3: | Line 3: | ||
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility. | Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility. | ||
− | The user must check in the menu Operating | Technique | Advanced SO2R | + | ===Setting up the technique=== |
+ | |||
+ | The user must check in the menu Operating | Technique | Advanced SO2R | ||
+ | |||
+ | ===Setting up the Shift key for secondary radio=== | ||
+ | |||
+ | The user must check in the menu Operating| Shift binds to the secondary radio. | ||
+ | |||
+ | ===Setting the SO2R Control box=== | ||
+ | |||
+ | The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an Ezmaster choose for settings 19200 bits per second, 8 data bits, none parity, and 1 stop bits, CW for DTR, PTT for RTS and Both Radios active. | ||
+ | |||
+ | Finally the user must set in the case of an Ezmaster control box in the menu Options | Ezmaster configuration, and choose the radios communication data. For example for two FT1000MPs the settings are port rs232 and com (cable connecting radios to Ezmaster), 4800 bauds speed, 8 bits, none parity, 2 stop . |
Revision as of 14:16, 5 October 2006
Setting up the EZMaster for use with Win-Test
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port . Ezmaster from Hamradiosolutions has this possibility.
Setting up the technique
The user must check in the menu Operating | Technique | Advanced SO2R
Setting up the Shift key for secondary radio
The user must check in the menu Operating| Shift binds to the secondary radio.
Setting the SO2R Control box
The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an Ezmaster choose for settings 19200 bits per second, 8 data bits, none parity, and 1 stop bits, CW for DTR, PTT for RTS and Both Radios active.
Finally the user must set in the case of an Ezmaster control box in the menu Options | Ezmaster configuration, and choose the radios communication data. For example for two FT1000MPs the settings are port rs232 and com (cable connecting radios to Ezmaster), 4800 bauds speed, 8 bits, none parity, 2 stop .