Difference between revisions of "SO2R/EZMaster"
m |
m (M0CLW moved page SO2R/EZMaster/Setup to SO2R/EZMaster: Unnecessary level of recursion) |
||
(2 intermediate revisions by 2 users not shown) | |||
Line 10: | Line 10: | ||
The user must check in the menu <tt>Operating | Shift binds to the secondary radio</tt>. | The user must check in the menu <tt>Operating | Shift binds to the secondary radio</tt>. | ||
+ | |||
+ | ===Setting up the ['''<tt>Caps Lock</tt>'''] key for secondary radio=== | ||
+ | |||
+ | The user must check in the menu <tt>Operating | Caps Lock binds to the secondary radio</tt>. | ||
===Setting the SO2R Control box=== | ===Setting the SO2R Control box=== | ||
− | The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and if using an EZMaster choose for settings 19200 bits per second, 8 data bits, | + | The control SO2R box must be configured in the menu <tt>Options | Configure interfaces</tt>, select a virtual COM port and - if using an EZMaster - choose for settings 19200 bits per second, 8 data bits, no parity, and 1 stop bit, CW for DTR, PTT for RTS and Both Radios active. |
− | Finally the user must set in the case of an EZMaster control box in the menu <tt>Options | EZMaster</tt> configuration, and choose the radios communication data. For example, for two FT1000MPs, the settings are port rs232 and com (cable connecting radios to EZMaster), 4800 | + | Finally the user must set in the case of an EZMaster control box in the menu <tt>Options | EZMaster</tt> configuration, and choose the radios communication data. For example, for two FT1000MPs, the settings are port '''rs232''' and '''com''' (cable connecting radios to EZMaster), a speed of 4800 baud, 8 data bits, no parity, 2 stop bits. |
==See also== | ==See also== |
Latest revision as of 15:23, 12 September 2013
Setting up the EZMaster for use with Win-Test
Advanced SO2R mode and setting up scenarios requires external SO2R control equipment of the last generation, communicating with Win-Test via a USB port. EZMaster from HamRadioSolutions has this possibility.
Setting up the technique
The user must check in the menu Operating | Technique | Advanced SO2R.
Setting up the [Shift] key for secondary radio
The user must check in the menu Operating | Shift binds to the secondary radio.
Setting up the [Caps Lock] key for secondary radio
The user must check in the menu Operating | Caps Lock binds to the secondary radio.
Setting the SO2R Control box
The control SO2R box must be configured in the menu Options | Configure interfaces, select a virtual COM port and - if using an EZMaster - choose for settings 19200 bits per second, 8 data bits, no parity, and 1 stop bit, CW for DTR, PTT for RTS and Both Radios active.
Finally the user must set in the case of an EZMaster control box in the menu Options | EZMaster configuration, and choose the radios communication data. For example, for two FT1000MPs, the settings are port rs232 and com (cable connecting radios to EZMaster), a speed of 4800 baud, 8 data bits, no parity, 2 stop bits.