Difference between revisions of "Message variables"
Jump to navigation
Jump to search
m (→SO2R: Updated $MK2R macro to clarify usage, added link.) |
m (→Action: Changed description of $REPEAT macro to make the purpose clear) |
||
Line 34: | Line 34: | ||
* '''<tt>$GRABSPOT</tt>''' grabs spot on the current frequency | * '''<tt>$GRABSPOT</tt>''' grabs spot on the current frequency | ||
* '''<tt>$GUESSEXCH</tt>''' (or '''<tt>$GUESSEXCHANGE</tt>'''): mimics a space bar hit, filling the exchange field(s) if possible, but the cursor remains in the same edit field. | * '''<tt>$GUESSEXCH</tt>''' (or '''<tt>$GUESSEXCHANGE</tt>'''): mimics a space bar hit, filling the exchange field(s) if possible, but the cursor remains in the same edit field. | ||
− | * '''<tt>$REPEAT</tt>''': | + | * '''<tt>$REPEAT</tt>''': restarts the [[Menu:Tools#Automatic_CQ_repeat|automatic repeating CQ]] sequence (if enabled), after pausing for the specified interval. Most useful at the end of the [[Menu:Options#Modify_standard_messages...|'''<tt>[Plus]</tt>''' key message]]. |
* '''<tt>$SPACEBAR</tt>''': works like hitting spacebar-key (move cursor to the next most-used field) | * '''<tt>$SPACEBAR</tt>''': works like hitting spacebar-key (move cursor to the next most-used field) | ||
* '''<tt>$TAB</tt>''': works like hitting ['''<tt>Tab</tt>'''] (move cursor to next field) | * '''<tt>$TAB</tt>''': works like hitting ['''<tt>Tab</tt>'''] (move cursor to next field) |
Revision as of 05:54, 2 June 2008
Messages Variables
These variables can be used in programming CW messages using the F-keys. Some of these variables do not actually create output but rather perform actions at specific points in time, like the $CR symbol.
CW automation
- $CHECK: send license year (ARRL SS only)
- $CORRECT: sends a call correction, if any (see correction)
- $F1...$F7: sends the message associated with F1 ... F7 function key
- $FREQP: contains the frequency of the primary radio (useful for passing mults)
- $FREQS: contains the frequency of the secondary radio (useful for passing mults)
- $INSERT: sends message in the [Ins] key
- $ISLAND: sends IOTA Reference (i.e. EU001, AF001, ...) (IOTA Contest)
- $LOGGEDCALL: sends what is typed in the callsign field
- $MSG1...$MSG12: sends additional CW messages (see Modify additional messages)
- $MYCALL: sends callsign set in contest configuration
- $MYNAME: sends operator name, set in contest configuration
- $PLUS: sends message in the [+] key
- $QQSLC: sends Quick QSL message based QSOs made (see Intelligent Quick QSL)
- $QQSLT: sends Quick QSL message based on time passed (see Intelligent Quick QSL)
- $QQSLRESET: reset the timer or the counter like if the long QSL message were just sent.
- $QSOB4: sends QSOB4 message (see Modify standard messages)
- $RST: sends report from RST field (normally 5NN)
- $SERIAL: sends QSO #
- $STATE: sends State/Province set in contest configuration (Exchange)
- $YEAR: sends year nr set in contest configuration (i.e. EUHFC, AA)
- $ZONE: sends zone nr set in contest configuration
- +: increase speed by 4 wpm
- -: decrease speed by 4 wpm
- ^: the halfspace character with 1/2 dot duration
Action
- $CR: works like hitting [Enter] (log QSO)
- $GRABSPOT grabs spot on the current frequency
- $GUESSEXCH (or $GUESSEXCHANGE): mimics a space bar hit, filling the exchange field(s) if possible, but the cursor remains in the same edit field.
- $REPEAT: restarts the automatic repeating CQ sequence (if enabled), after pausing for the specified interval. Most useful at the end of the [Plus] key message.
- $SPACEBAR: works like hitting spacebar-key (move cursor to the next most-used field)
- $TAB: works like hitting [Tab] (move cursor to next field)
SO2R
- $ALTERNATECQ (or $ACQ): swaps primary and secondary radios and send CQ on the secondary radio
- $CQ: same as $ALTERNATECQ but does not swap radios
- $LATCH: sets latch mode
- $MK2R=cmd: send a specific MK2R command to the microHAM MK2R SO2R box. See Integrated_SO2R_boxes for usage notes.
- $R1R1: set audio of Radio 1 to left and right ear
- $R1R2: set audio of Radio 1 to left and audio of Radio 2 to right ear
- $R2R1: set audio of Radio 2 to left and audio of Radio 1 to right ear
- $R2R2: set audio of Radio 2 to left and right ear
- $RESET: cancels any manual change made in the audio control
- $TR1: transmit on primary radio
- $TR2: transmit on secondary radio
- $13: send carriage return character (specific to RTTY)
- $CALLSIGN: send callsign of the current QTC
- $DONE: if all QTC are sent: mimic the [+] key
- $GRNR: sends group & number of the received QTC
- $NEXT: move focus to the next QTC line
- $QTC: sends group & number of the transmitted QTC
- $SERIAL: send serial number of the current QTC
- $SERIE: send the complete QTC block (specific to RTTY)
- $TIME: send time of the current QTC
- $VALID: save everything and close the window