Difference between revisions of "Message variables"

From Win-Test Wiki
Jump to: navigation, search
(CW automation)
(Style guide changes)
Line 1: Line 1:
=Message variables=
+
<big><big>Messages Variables</big></big>
 +
<!-- Adopted to Stylesheet DL6RAI -->
  
These variables can be used in programming CW messages using the F-keys. Some of these variables do not actually create output but rather perform actions at specific points in time, like the $CR symbol.
+
These variables can be used in programming CW messages using the F-keys. Some of these variables do not actually create output but rather perform actions at specific points in time, like the '''<tt>$CR</tt>''' symbol.
  
 
==CW automation==
 
==CW automation==
*      $MYCALL : sends callsign set in contest configuration
+
*      '''<tt>$MYCALL</tt>''': sends callsign set in contest configuration
*      $SERIAL : sends QSO #
+
*      '''<tt>$SERIAL</tt>''': sends QSO #
*      $ZONE : sends zone nr set in contest configuration
+
*      '''<tt>$ZONE</tt>''': sends zone nr set in contest configuration
*      $LOGGEDCALL : send what's typed in callsign field
+
*      '''<tt>$LOGGEDCALL</tt>''': send what's typed in callsign field
*      $CORRECT : send a call correction, if any
+
*      '''<tt>$CORRECT</tt>''': send a call correction, if any
*      $INSERT and $PLUS : send messages behind INS or + key
+
*      '''<tt>$INSERT and $PLUS</tt>''': send messages in ['''<tt>INS</tt>'''] or ['''<tt>+</tt>'''] key
*      ++ : increase speed by 2 wpm
+
*      '''<tt>++</tt>''': increase speed by 2 wpm
*      -- : decrease speed by 2 wpm
+
*      '''<tt>--</tt>''': decrease speed by 2 wpm
*      ^ : the halfspace character with 1/2 dot duration
+
*      '''<tt>^</tt>''': the halfspace character with 1/2 dot duration
*      $QSOB4 : send QSOB4 message
+
*      '''<tt>$QSOB4</tt>''': send QSOB4 message
*      $F1...$F6 : send the message associated with F1 ... F6 function key
+
*      '''<tt>$F1...$F6</tt>''': send the message associated with F1 ... F6 function key
*      $MSG1...$MSG12 : additional CW messages (see Alt - C)
+
*      '''<tt>$MSG1...$MSG12</tt>''': additional CW messages (see '''<tt>Alt-C</tt>''')
  
 
==Action==
 
==Action==
*      $GUESSEXCH (or $GUESSEXCHANGE) : mimics a space bar hit (filling exchange field(s)
+
*      '''<tt>$GUESSEXCH</tt>''' (or '''<tt>$GUESSEXCHANGE</tt>'''): mimics a space bar hit (filling exchange field(s)
*      $GUESSZONE : filling exchange field(s) if possible, but cursor remains in the same edit field.
+
*      '''<tt>$GUESSZONE</tt>''': filling exchange field(s) if possible, but cursor remains in the same edit field.
*      $CR : works like hitting enter-key (log Qso)
+
*      '''<tt>$CR</tt>''': works like hitting ['''<tt>Enter</tt>'''] (log QSO)
*      $SPACEBAR : works like hitting spacebar-key (move cursor to exchange field)
+
*      '''<tt>$SPACEBAR</tt>''': works like hitting spacebar-key (move cursor to exchange field)
*      $TAB work like hitting tab-key (move cursor to next field)
+
*      '''<tt>$TAB</tt>''': works like hitting ['''<tt>Tab</tt>'''] (move cursor to next field)
*      $REPEAT : Reset the automatic repeat mode interval
+
*      '''<tt>$REPEAT</tt>''': reset the automatic repeat mode interval
*      $GRABSPOT: grabs spot on the current frequency
+
*      '''<tt>$GRABSPOT</tt>''' grabs spot on the current frequency
  
 
==SO2R==
 
==SO2R==
*      $ALTERNATECQ (or $ACQ) : swaps primary and secondary radios and send CQ on the secondary radio
+
*      '''<tt>$ALTERNATECQ</tt>''' (or '''<tt>$ACQ</tt>'''): swaps primary and secondary radios and send CQ on the secondary radio
*      $CQ : same as $ALTERNATECQ but does not swap radios
+
*      '''<tt>$CQ</tt>''': same as $ALTERNATECQ but does not swap radios
*      $R1R1 : Set audio of Radio 1 to left and right ear
+
*      '''<tt>$R1R1</tt>''': set audio of Radio 1 to left and right ear
*      $R1R2 : Set audio of Radio 1 to left and audio of radio 2 to right ear
+
*      '''<tt>$R1R2</tt>''': set audio of Radio 1 to left and audio of radio 2 to right ear
*      $R2R1 : Set audio of Radio 1 to left and audio of radio 1 to right ear
+
*      '''<tt>$R2R1</tt>''': set audio of Radio 1 to left and audio of radio 1 to right ear
*      $R2R2 : Set audio of Radio 2 to left and right ear
+
*      '''<tt>$R2R2</tt>''': set audio of Radio 2 to left and right ear
*      $RESET : cancels any manual change made in the audio control
+
*      '''<tt>$RESET</tt>''': cancels any manual change made in the audio control
*      $TR1 : Transmit on Radio 1
+
*      '''<tt>$TR1</tt>''': transmit on Radio 1
*      $TR2 : Transmit on Radio 2
+
*      '''<tt>$TR2</tt>''': transmit on Radio 2
*      $LATCH : sets latch mode
+
*      '''<tt>$LATCH</tt>''': sets latch mode
  
 
==WAEDC QTC related==
 
==WAEDC QTC related==
*      $GRNR : sends gr/num of the received QTC
+
*      '''<tt>$GRNR</tt>''': sends group number of the received QTC
  
 
[[Main Page|Back to Main Page]]
 
[[Main Page|Back to Main Page]]

Revision as of 12:22, 7 August 2006

Messages Variables

These variables can be used in programming CW messages using the F-keys. Some of these variables do not actually create output but rather perform actions at specific points in time, like the $CR symbol.

CW automation

  • $MYCALL: sends callsign set in contest configuration
  • $SERIAL: sends QSO #
  • $ZONE: sends zone nr set in contest configuration
  • $LOGGEDCALL: send what's typed in callsign field
  • $CORRECT: send a call correction, if any
  • $INSERT and $PLUS: send messages in [INS] or [+] key
  • ++: increase speed by 2 wpm
  • --: decrease speed by 2 wpm
  • ^: the halfspace character with 1/2 dot duration
  • $QSOB4: send QSOB4 message
  • $F1...$F6: send the message associated with F1 ... F6 function key
  • $MSG1...$MSG12: additional CW messages (see Alt-C)

Action

  • $GUESSEXCH (or $GUESSEXCHANGE): mimics a space bar hit (filling exchange field(s)
  • $GUESSZONE: filling exchange field(s) if possible, but cursor remains in the same edit field.
  • $CR: works like hitting [Enter] (log QSO)
  • $SPACEBAR: works like hitting spacebar-key (move cursor to exchange field)
  • $TAB: works like hitting [Tab] (move cursor to next field)
  • $REPEAT: reset the automatic repeat mode interval
  • $GRABSPOT grabs spot on the current frequency

SO2R

  • $ALTERNATECQ (or $ACQ): swaps primary and secondary radios and send CQ on the secondary radio
  • $CQ: same as $ALTERNATECQ but does not swap radios
  • $R1R1: set audio of Radio 1 to left and right ear
  • $R1R2: set audio of Radio 1 to left and audio of radio 2 to right ear
  • $R2R1: set audio of Radio 1 to left and audio of radio 1 to right ear
  • $R2R2: set audio of Radio 2 to left and right ear
  • $RESET: cancels any manual change made in the audio control
  • $TR1: transmit on Radio 1
  • $TR2: transmit on Radio 2
  • $LATCH: sets latch mode

WAEDC QTC related

  • $GRNR: sends group number of the received QTC

Back to Main Page