Keys

From Win-Test Wiki
Revision as of 11:22, 18 January 2007 by I2WIJ (Talk | contribs) (Special Keys: added comment)

Jump to: navigation, search


Editing and moving around the QSO entry line

  • [Enter]: Log a contact
  • [Spacebar]: Move cursor between callsign entry and report fields
  • [Left arrow]: Move cursor one character to the left
  • [Right arrow]: Move cursor one character to the right
  • [Home]: Move cursor to the beginning of the field
  • [End]: Moves the cursor to the end of the field
  • [Backspace]: Delete the character located left of the cursor
  • [Tab] : Move cursor between sent RST and received number fields
  • [>]: Move cursor through all fields, including time
  • [<]: Move cursor through all fields, including time
  • [Del]: Delete the character located under the cursor
  • [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
  • Alt-W: Clear QSO (like F11)
  • Alt-F8: Clear QSO (like F11)
  • Alt-F: Edit QSO date and time
  • Alt-N: Write a note regarding this QSO
  • Alt-Up arrow: Copy the previous QSO in the log
  • Ctrl-A: like [Home]
  • Ctrl-E: like [End]
  • Ctrl-W: Clear the current field; if report field is cleared, initialise RST
  • Ctrl-K: like [Shift-Del]
  • Ctrl-Left arrow: like [Home]
  • Ctrl-Right arrow: like [End]
  • Shift-Backspace: Delete all the characters left of the cursor
  • Shift-Del: Delete all characters under and right of the cursor

Movement in the log

Warning: Any movement in the log validates the QSO where the cursor was located before the movement!

  • [Up arrow]: Move one QSO up
  • [Down arrow]: Move one QSO down
  • [PageUp]: Move 10 QSOs up
  • [PageDown]: Move 10 QSOs down
  • Ctrl-G: Go to a specific QSO number
  • Ctrl-Home: Go to first QSO in log
  • Ctrl-End: Go to last QSO in log
  • Ctrl-PageUp: Go back 24 hours

Message keys

  • [F1]: Play message #1. Normally, this message is the CQ
  • [F2]: Play message #2. Normally, this message is the report sent (full)
  • [F3]: Play message #3. Normally, this message is the serial number sent
  • [F4]: Play message #4. Normally, this message is your call
  • [F5]: Play message #5. Normally, this message is the logged callsign
  • [F6]: Play message #6 (CW only)
  • [F7]: Play message #7 (CW only)
  • [Insert]: Play the message defined for this key (CW only) - normally, this message is the logged callsign the full sent report
  • [+]: Play the message defined for this key (CW only) - normally, this message sends a TU, then your callsign and automatically validates the logged QSO
  • [Esc]: Stop the output message being sent
  • Alt-K: Toggle Keyboard mode
  • Alt-C: Send or modify additional messages
  • Alt-V: Change CW speed (opens "CW-Speed" dialog box)
  • Alt-F9: Decrease CW speed by 2 WPM
  • Alt-F10: Increase CW speed by 2 WPM
  • Shift-F1...Shift-F7: Record messages #1 to #7
  • Shift-Insert: Record the message associated to the [Insert] key
  • Shift-+: Records the message associated to the [+] key

Open and Close Windows

  • [F8]: Open/Close Check Partials Window
  • [F9]: Open/Close Check call Window
  • [F10]: Open/Close Check multipliers Window
  • [F12]: Open/Close Check Partials Window
  • Alt-B: Open/Close Skeds Window
  • Alt-E: Take a sked
  • Alt-M: Open/Close Mult Window
  • Alt-R: Open/Close Rate Window
  • Alt-S: Open/Close Summary
  • Alt-X: Open Extra Data Files Window
  • Alt-Z: Open/Close Worked zones Window
  • Ctrl-F9: Open/Close Statistics Window
  • Shift-F10: Reverse Mult Check - display calls worked from that Multiplier by band in Check Partials window

Radio Control

  • [-]: Split frequency - enter your receive frequency here (e.g. 7239)
  • [*]: Switch active radio
  • Alt-: : Switch active radio
  • Alt-F1: QSY band down (20 => 40 => ...)
  • Alt-F2: QSY band up (20 => 15 => ...)
  • Alt-F4: QSY back to run frequency
  • Alt-F5: Set run frequency
  • Ctrl-T: Tune the transmitter (on CW)
  • Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)

Packet

  • Alt-A: Open/Close DX-Cluster Anouncements Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-T: Talk to DX-Cluster
  • Alt-F3: Spot

Band Map

  • Ctrl-Enter: Insert spot into Band Map
  • Ctrl-Del: Delete spot on current frequency in the active Band Map
  • Ctrl-J: Insert spot into Band Map
  • Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
  • Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
  • Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
  • Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
  • Ctrl-Space: Grab the current on the current frequency

Networking

  • Alt-D: Pass a station
  • Alt-G: Send a gab
  • Alt-I: Open Gab Window
  • Alt-J: Display status of all stations in the network

Multi Operator

  • Alt-Y: Toggle current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
  • Ctrl-F3: Toggle current QSO (like Alt-Y)

Partner Mode

  • Alt-Enter: Add call to partner window
  • Alt-Space: Grab 1st line from the partner window real time lines
  • Alt-1...Alt-9: Grab nth call in partner window stack
  • Ctrl-1...Ctrl-9: Swap nth call in partner window with QSO entry line

Special Keys

Back to Main Page