Keys

From Win-Test Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Editing and moving around the QSO entry line

  • [Enter]: Log a contact
  • [Spacebar]: Move cursor between callsign entry and report fields
  • [Left arrow]: Move cursor one character to the left
  • [Right arrow]: Move cursor one character to the right
  • [Home]: Move cursor to the beginning of the field
  • [End]: Moves the cursor to the end of the field
  • [Backspace]: Delete the character located left of the cursor
  • [Tab] : Move cursor between sent RST and received number fields
  • [>]: Move cursor through all fields, including time
  • [<]: Move cursor through all fields, including time
  • [Del]: Delete the character located under the cursor
  • [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
  • Alt-W: Clear QSO (like F11)
  • Alt-F8: Clear QSO (like F11)
  • Alt-F: Edit QSO date and time
  • Alt-N: Write a note regarding this QSO
  • Alt-Up arrow: Copy the previous QSO in the log
  • Ctrl-A: like [Home]
  • Ctrl-E: like [End]
  • Ctrl-W: Clear the current field; if report field is cleared, initialise RST
  • Ctrl-K: like [Shift-Del]
  • Ctrl-Left arrow: like [Home]
  • Ctrl-Right arrow: like [End]
  • Shift-Backspace: Delete all the characters left of the cursor
  • Shift-Del: Delete all characters under and right of the cursor

Movement in the log

Warning: Any movement in the log validates the QSO where the cursor was located before the movement!

  • [Up arrow]: Move one QSO up
  • [Down arrow]: Move one QSO down
  • [PageUp]: Move 10 QSOs up
  • [PageDown]: Move 10 QSOs down
  • Ctrl-G: Go to a specific QSO number
  • Ctrl-Home: Go to first QSO in log
  • Ctrl-End: Go to last QSO in log
  • Ctrl-PageUp: Go back 24 hours

Message keys

  • [F1]: Play message n°1. Normally, this message is the CQ
  • [F2]: Play message n°2. Normally, this message is the report sent (full)
  • [F3]: Play message n°3. Normally, this message is the serial number sent
  • [F4]: Play message n°4. Normally, this message is your call
  • [F5]: Play message n°5. Normally, this message is the logged callsign
  • [F6]: Play message n°6 (CW only)
  • [F7]: Play message n°7 (CW only)
  • [Insert]: Play the message definied for this key (CW only) - normally, this message is the logged callsign the full sent report
  • [+]: Play the message definied for this key (CW only) - normally, this message sends a TU, then your callsign and automatically validates the logged QSO
  • [Esc]: Stop the output message being sent
  • Alt-K: Toggle Keyboard mode
  • Alt-C: Send or modify additional messages
  • Alt-V: Change CW speed (opens "CW-Speed" dialog box)
  • Alt-F9: Decrease CW speed by 2 WPM
  • Alt-F10: Increase CW speed by 2 WPM
  • Shift-F1...Shift-F7: Record messages n°1 to n°7
  • Shift-Insert: Record the message associated to the [Insert] key
  • Shift-+: Records the message associated to the [+] key

Open and Close Windows

  • F8: Open/Close Check Partials Window
  • F9: Open/Close Check call Window
  • F10: Open/Close Check multipliers Window
  • F12: Open/Close Check Partials Window
  • Alt-B: Open/Close Skeds Window
  • Alt-E: Take a sked
  • Alt-M: Open/Close Mult Window
  • Alt-R: Open/Close Rate Window
  • Alt-S: Open/Close Summary
  • Alt-X: Open Extra Data Files Window
  • Alt-Z: Open/Close Worked zones Window
  • Ctrl-F9: Open/Close Statistics Window
  • Shift-F10: Reverse Mult Check - display calls worked from that Multiplier by band in Check Partials window

Radio Control

  • -: Split frequency - enter your receive frequency here (e.g. 7239)
  • *: Switch active radio
  • Alt-:: Switch active radio
  • Alt-F1: QSY band down (20 => 40 => ...)
  • Alt-F2: QSY band up (20 => 15 => ...)
  • Alt-F4: QSY back to run frequency
  • Alt-F5: Set run frequency
  • Ctrl-T: Tune the transmitter (on CW)
  • Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)

Packet

  • Alt-A: Open/Close DX-Cluster Anouncements Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-T: Talk to DX-Cluster
  • Alt-F3: Spot

Band Map

  • Ctrl-Enter: Insert spot into Band Map
  • Ctrl-Del: Delete spot on current frequency in the active Band Map
  • Ctrl-J: Insert spot into Band Map
  • Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
  • Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
  • Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
  • Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
  • Ctrl-Space: Grab the current on the current frequency

Networking

  • Alt-D: Pass a station
  • Alt-G: Send a gab
  • Alt-I: Open Gab Window
  • Alt-J: Display status of all stations in the network

Multi Operator

  • Alt-Y: Toggle current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
  • Ctrl-F3: Toggle current QSO (like Alt-Y)

Partner Mode

  • Alt-Enter: Add call to partner window
  • Alt-Space: Grab 1st line from the partner window real time lines
  • Alt-1...Alt-9: Grab nth call in partner window stack
  • Ctrl-1...Ctrl-9: Swap nth call in partner window with QSO entry line

Special Keys

Back to Main Page

Retrieved from "https://docs.win-test.com/w/index.php?title=Keys&oldid=2614"