Keys

Editing and moving around the QSO entry line

[Enter]: Log a contact
[Spacebar]: Move cursor between callsign entry and report fields
[Left arrow]: Move cursor one character to the left
[Right arrow]: Move cursor one character to the right
[Home]: Move cursor to the beginning of the field
[End]: Moves the cursor to the end of the field
[Backspace]: Delete the character located left of the cursor
[Tab] : Move cursor between sent RST and received number fields
[>]: Move cursor through all fields, including time
[<]: Move cursor through all fields, including time
[Del]: Delete the character located under the cursor
[F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
Alt-W: Clear QSO (like F11)
Alt-F8: Clear QSO (like F11)
Alt-F: Edit QSO date and time
Alt-N: Write a note regarding this QSO
Alt-Up arrow: Copy the previous QSO in the log
Ctrl-A: like [Home]
Ctrl-E: like [End]
Ctrl-W: Clear the current field; if report field is cleared, initialise RST
Ctrl-K: like [Shift-Del]
Ctrl-Left arrow: like [Home]
Ctrl-Right arrow: like [End]
Shift-Backspace: Delete all the characters left of the cursor
Shift-Del: Delete all characters under and right of the cursor

Warning: Any movement in the log validates the QSO where the cursor was located before the movement!

[F1]: Play message #1. Normally, this message is the CQ
[F2]: Play message #2. Normally, this message is the report sent (full)
[F3]: Play message #3. Normally, this message is the serial number sent
[F4]: Play message #4. Normally, this message is your call
[F5]: Play message #5. Normally, this message is the logged callsign
[F6]: Play message #6 (CW only)
[F7]: Play message #7 (CW only)
[Insert]: Play the message defined for this key (CW only) - normally, this message is the logged callsign the full sent report
[+]: Play the message defined for this key (CW only) - normally, this message sends a TU, then your callsign and automatically validates the logged QSO
[Esc]: Stop the output message being sent
Alt-K: Toggle Keyboard mode
Alt-C: Send or modify additional messages
Alt-V: Change CW speed (opens "CW-Speed" dialog box)
Alt-F9: Decrease CW speed by 2 WPM
Alt-F10: Increase CW speed by 2 WPM
Shift-F1...Shift-F7: Record messages #1 to #7
Shift-Insert: Record the message associated to the [Insert] key
Shift-+: Records the message associated to the [+] key

[F8]: Open/Close Check Partials Window
[F9]: Open/Close Check call Window
[F10]: Open/Close Check multipliers Window
[F12]: Open/Close Check Partials Window
Alt-A: Open/Close DX-Cluster Announcements Window
Alt-B: Open/Close Skeds Window
Alt-E: Take a sked
Alt-I: Open/Close Gab Window
Alt-M: Open/Close Mult Window
Alt-O: Open/Close DX-Cluster Monitor Window
Alt-R: Open/Close Rate Window
Alt-S: Open/Close Summary
Alt-X: Open Extra Data Files Window
Alt-Z: Open/Close Worked zones Window
Ctrl-F9: Open/Close Statistics Window
Shift-F10: Reverse Mult Check - display calls worked from that Multiplier by band in Check Partials window

[-]: Split frequency - enter your receive frequency here (e.g. 7239)
[*]: Switch active radio
Alt-: : Switch active radio
Alt-F1: QSY band down (20 => 40 => ...)
Alt-F2: QSY band up (20 => 15 => ...)
Alt-F4: QSY back to run frequency
Alt-F5: Set run frequency
Ctrl-S: Swap the frequency on both radios (SO2R)
Ctrl-T: Tune the transmitter (on CW)
Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)

Ctrl-Enter: Insert spot into Band Map
Ctrl-Del: Delete spot on current frequency in the active Band Map
Ctrl-J: Insert spot into Band Map
Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
Ctrl-Space: Grab the current on the current frequency
Ctrl-DoubleClick on a spot: Delete the spot without the warning window
Alt-DoubleClick on a spot: Loads the sub VFO (if applicable)

Alt-Y: Toggle current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
Ctrl-F3: Toggle current QSO (like Alt-Y)