Difference between revisions of "Keys"

From Win-Test Wiki
Jump to: navigation, search
(Partner Mode)
(Radio Control)
 
(36 intermediate revisions by 5 users not shown)
Line 10: Line 10:
 
* ['''<tt>Backspace</tt>''']: Delete the character located left of the cursor
 
* ['''<tt>Backspace</tt>''']: Delete the character located left of the cursor
 
* ['''<tt>Tab</tt>'''] : Move cursor between sent RST and received number fields
 
* ['''<tt>Tab</tt>'''] : Move cursor between sent RST and received number fields
* ['''<tt>></tt>''']: Move cursor through all fields, including time
+
* ['''<tt>></tt>''']: Move cursor to next field in the main log.
* ['''<tt><</tt>''']: Move cursor through all fields, including time
+
* ['''<tt><</tt>''']: Move cursor to previous field in the main log.
 
* ['''<tt>Del</tt>''']: Delete the character located under the cursor
 
* ['''<tt>Del</tt>''']: Delete the character located under the cursor
 
* ['''<tt>F11</tt>''']: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
 
* ['''<tt>F11</tt>''']: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
Line 19: Line 19:
 
* '''<tt>Alt-N</tt>''': Write a note regarding this QSO
 
* '''<tt>Alt-N</tt>''': Write a note regarding this QSO
 
* '''<tt>Alt-Up arrow</tt>''': Copy the previous QSO in the log
 
* '''<tt>Alt-Up arrow</tt>''': Copy the previous QSO in the log
* '''<tt>Ctrl-A</tt>''': like ['''<tt>Home</tt>''']
+
* '''<tt>Ctrl-A</tt>''': Like ['''<tt>Home</tt>''']
* '''<tt>Ctrl-E</tt>''': like ['''<tt>End</tt>''']
+
* '''<tt>Ctrl-B</tt>''': Like ['''<tt>Left arrow</tt>''']
 +
* '''<tt>Ctrl-D</tt>''': Like ['''<tt>Del</tt>''']
 +
* '''<tt>Ctrl-E</tt>''': Like ['''<tt>End</tt>''']
 +
* '''<tt>Ctrl-F</tt>''': Like ['''<tt>Right arrow</tt>''']
 
* '''<tt>Ctrl-W</tt>''': Clear the current field; if report field is cleared, initialise RST
 
* '''<tt>Ctrl-W</tt>''': Clear the current field; if report field is cleared, initialise RST
* '''<tt>Ctrl-K</tt>''': like ['''<tt>Shift-Del</tt>''']
+
* '''<tt>Ctrl-K</tt>''': Like ['''<tt>Shift-Del</tt>''']
* '''<tt>Ctrl-Left arrow</tt>''': like ['''<tt>Home</tt>''']
+
* '''<tt>Ctrl-Z</tt>''': Undo - restores edited QSO data to prior value (see [[Menu:Edit#Restore_QSO]])
* '''<tt>Ctrl-Right arrow</tt>''': like ['''<tt>End</tt>''']
+
* '''<tt>Ctrl-Left arrow</tt>''': Like ['''<tt>Home</tt>''']
 +
* '''<tt>Ctrl-Right arrow</tt>''': Like ['''<tt>End</tt>''']
 
* '''<tt>Shift-Backspace</tt>''': Delete all the characters left of the cursor
 
* '''<tt>Shift-Backspace</tt>''': Delete all the characters left of the cursor
 
* '''<tt>Shift-Del</tt>''': Delete all characters under and right of the cursor
 
* '''<tt>Shift-Del</tt>''': Delete all characters under and right of the cursor
Line 34: Line 38:
 
* ['''<tt>Up arrow</tt>''']: Move one QSO up  
 
* ['''<tt>Up arrow</tt>''']: Move one QSO up  
 
* ['''<tt>Down arrow</tt>''']: Move one QSO down  
 
* ['''<tt>Down arrow</tt>''']: Move one QSO down  
* ['''<tt>PageUp</tt>''']: Move 10 QSOs up  
+
* ['''<tt>PgUp</tt>''']: Move 10 QSOs up  
* ['''<tt>PageDown</tt>''']: Move 10 QSOs down  
+
* ['''<tt>PgDn</tt>''']: Move 10 QSOs down  
 +
* '''<tt>Ctrl-Shift-G</tt>''': Go to callsign (press again for next QSO with this callsign)
 
* '''<tt>Ctrl-G</tt>''': Go to a specific QSO number
 
* '''<tt>Ctrl-G</tt>''': Go to a specific QSO number
 +
** To skip the dialog box prompt, just enter the QSO number into the callsign field, then Press '''<tt>Ctrl-G</tt>'''.  To return to the end of the log, press '''<tt>Ctrl-G</tt>''', ['''<tt>Spacebar</tt>''']
 +
* '''<tt>Ctrl-G</tt>''', ['''<tt>Home</tt>''']: Go to first QSO in log
 +
* '''<tt>Ctrl-G</tt>''', ['''<tt>End</tt>''']: Go to last QSO in log
 
* '''<tt>Ctrl-Home</tt>''': Go to first QSO in log
 
* '''<tt>Ctrl-Home</tt>''': Go to first QSO in log
 
* '''<tt>Ctrl-End</tt>''': Go to last QSO in log
 
* '''<tt>Ctrl-End</tt>''': Go to last QSO in log
* '''<tt>Ctrl-PageUp</tt>''': Go back 24 hours
+
* '''<tt>Ctrl-PgDn</tt>''': Go forward 12 hours in the log
 +
* '''<tt>Ctrl-PgUp</tt>''': Go back 12 hours in the log
  
 
==Message keys==
 
==Message keys==
Line 47: Line 56:
 
* ['''<tt>F4</tt>''']: Play message #4. Normally, this message is your call
 
* ['''<tt>F4</tt>''']: Play message #4. Normally, this message is your call
 
* ['''<tt>F5</tt>''']: Play message #5. Normally, this message is the logged callsign
 
* ['''<tt>F5</tt>''']: Play message #5. Normally, this message is the logged callsign
* ['''<tt>F6</tt>''']: Play message #6 (CW only)
+
* ['''<tt>F6</tt>''']: Play message #6. Normally, this message sends Call? or NR?
* ['''<tt>F7</tt>''']: Play message #7 (CW only)
+
* ['''<tt>F7</tt>''']: Play message #7. Normally, this message sends "?" or "Again?"
* ['''<tt>Insert</tt>''']: Play the message defined for this key (CW only) - normally, this message is the logged callsign the full sent report
+
* ['''<tt>Insert</tt>''']: Play the message defined for this key (CW/RTTY only) - normally, this message is the logged callsign the full sent report
* ['''<tt>+</tt>''']: Play the message defined for this key (CW only) - normally, this message sends a TU, then your callsign and automatically validates the logged QSO
+
* ['''<tt>+</tt>''']: Play the message defined for this key (CW/RTTY only) - normally, this message sends a TU, then your callsign and automatically logs the QSO.  See also [[Menu:Tools#Remapping_.5B.2A.5D_and_.5B.2B.5D_when_using_Notebook_or_Mini_keyboard|Remapping [+] when using a Notebook or Mini keyboard]].
 
* ['''<tt>Esc</tt>''']: Stop the output message being sent
 
* ['''<tt>Esc</tt>''']: Stop the output message being sent
 
* '''<tt>Alt-K</tt>''': Toggle Keyboard mode
 
* '''<tt>Alt-K</tt>''': Toggle Keyboard mode
Line 57: Line 66:
 
* '''<tt>Alt-F9</tt>''': Decrease CW speed by 2 WPM
 
* '''<tt>Alt-F9</tt>''': Decrease CW speed by 2 WPM
 
* '''<tt>Alt-F10</tt>''': Increase CW speed by 2 WPM
 
* '''<tt>Alt-F10</tt>''': Increase CW speed by 2 WPM
* '''<tt>Shift-F1</tt>'''...'''<tt>Shift-F7</tt>''': Record messages #1 to #7
+
* '''<tt>Shift-F1</tt>'''...'''<tt>Shift-F7</tt>''': Record messages #1 to #7 (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled)
* '''<tt>Shift-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key
+
* '''<tt>Shift-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled).  CW/RTTY only.  For Phone, the F2 message is the Insert message.
* '''<tt>Shift-+</tt>''': Records the message associated to the ['''<tt>+</tt>'''] key
+
* '''<tt>Shift-+</tt>''': Records the message associated to the ['''<tt>+</tt>'''] key (unless [[SO2R/Shift_binds_second_radio|Operating | Shift binds to the second radio]] is enabled).  CW/RTTY only.  For Phone, the F3 message is the Plus message.
 +
* '''<tt>AltGr-F1</tt>'''...'''<tt>AltGr-F7</tt>''': Record messages #1 to #7
 +
* '''<tt>AltGr-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key
 +
* '''<tt>AltGr-+</tt>''':  Records the message associated to the ['''<tt>+</tt>'''] key
 +
* '''<tt>Ctrl-Alt-F1</tt>'''...'''<tt>Ctrl-Alt-F7</tt>''': Record messages #1 to #7
 +
* '''<tt>Ctrl-Alt-Insert</tt>''': Record the message associated to the ['''<tt>Insert</tt>'''] key
 +
* '''<tt>Ctrl-Alt-+</tt>''':Records the message associated to the ['''<tt>+</tt>'''] key
 +
* '''<tt>Ctrl-Tab</tt>''': Toggle between Run and S&P mode and messages (CW/RTTY)
 +
* '''<tt>Ctrl-Shift-Tab</tt>''': Toggle between Run and S&P mode and messages on the secondary radio
  
 
==Open and Close Windows==
 
==Open and Close Windows==
* ['''<tt>F8</tt>''']: Open/Close Check Partials Window
+
* ['''<tt>F8</tt>''']: Open/Close N + 1 Window
 
* ['''<tt>F9</tt>''']: Open/Close Check call Window
 
* ['''<tt>F9</tt>''']: Open/Close Check call Window
* ['''<tt>F10</tt>''']: Open/Close Check multipliers Window
+
* ['''<tt>F10</tt>''']: Open/Close Check Multipliers Window
 
* ['''<tt>F12</tt>''']: Open/Close Check Partials Window
 
* ['''<tt>F12</tt>''']: Open/Close Check Partials Window
 
* '''<tt>Alt-A</tt>''': Open/Close DX-Cluster Announcements Window
 
* '''<tt>Alt-A</tt>''': Open/Close DX-Cluster Announcements Window
Line 77: Line 94:
 
* '''<tt>Alt-Z</tt>''': Open/Close Worked zones Window
 
* '''<tt>Alt-Z</tt>''': Open/Close Worked zones Window
 
* '''<tt>Ctrl-F9</tt>''': Open/Close Statistics Window
 
* '''<tt>Ctrl-F9</tt>''': Open/Close Statistics Window
* '''<tt>Shift-F10</tt>''': Reverse Mult Check - display calls worked from that Multiplier by band in Check Partials window
+
* '''<tt>Shift-F10</tt>''': Reverse Multiplier Check - Opens the [[Menu:Windows#Search_for_Worked_Multipliers_or_Partial_QTH_Locators|Search for Worked Multipliers]] Window
  
 
==Radio Control==
 
==Radio Control==
* ['''<tt>-</tt>''']: Split frequency - enter your receive frequency here (e.g. 7239)
+
* ['''<tt>-</tt>''']: Split frequency - enter QSX frequency here (e.g. 7239). "+1" will set the RX VFO +1 kHz from TX VFO. "0" turns split frequency mode off.
* ['''<tt>*</tt>''']: Switch active radio (It only works with the ['''<tt>*</tt>'''] key on the numeric keypad!)
+
* ['''<tt>*</tt>''']: Switch active radio. '''This only works with the ['''<tt>*</tt>'''] key on the numeric keypad'''.  See also [[Menu:Tools#Remapping_.5B.2A.5D_and_.5B.2B.5D_when_using_Notebook_or_Mini_keyboard|Remapping [*] when using a Notebook or Mini keyboard]].
 
* '''<tt>Alt-:</tt>''' : Switch active radio
 
* '''<tt>Alt-:</tt>''' : Switch active radio
 
* '''<tt>Alt-F1</tt>''': QSY band down (20 => 40 => ...)
 
* '''<tt>Alt-F1</tt>''': QSY band down (20 => 40 => ...)
Line 88: Line 105:
 
* '''<tt>Alt-F5</tt>''': Set run frequency
 
* '''<tt>Alt-F5</tt>''': Set run frequency
 
* '''<tt>Ctrl-S</tt>''': Swap the frequency on both radios (SO2R)
 
* '''<tt>Ctrl-S</tt>''': Swap the frequency on both radios (SO2R)
* '''<tt>Ctrl-T</tt>''': Tune the transmitter (on CW)
+
* '''<tt>Ctrl-T</tt>''': Tune the transmitter (on CW, max 30 seconds)
 
* '''<tt>Ctrl-F1</tt>''' and '''<tt>Ctrl-F2</tt>''': Switch mode (when the contest permits and mode=MIXED or ALL)
 
* '''<tt>Ctrl-F1</tt>''' and '''<tt>Ctrl-F2</tt>''': Switch mode (when the contest permits and mode=MIXED or ALL)
  
Line 98: Line 115:
  
 
==Band Map==
 
==Band Map==
* '''<tt>Ctrl-Enter</tt>''': Insert spot into Band Map  
+
* '''<tt>Ctrl-Enter</tt>''': Insert spot into [[Menu:Windows#Radio_1.2C_Radio_2_.28Band_Maps.29|Band Map]]
 
* '''<tt>Ctrl-Del</tt>''': Delete spot on current frequency in the active Band Map
 
* '''<tt>Ctrl-Del</tt>''': Delete spot on current frequency in the active Band Map
 
* '''<tt>Ctrl-J</tt>''': Insert spot into Band Map
 
* '''<tt>Ctrl-J</tt>''': Insert spot into Band Map
Line 106: Line 123:
 
* '''<tt>Ctrl-Shift-Down arrow</tt>''': Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
 
* '''<tt>Ctrl-Shift-Down arrow</tt>''': Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
 
* '''<tt>Ctrl-Space</tt>''': Grab the spot on or near the current frequency
 
* '''<tt>Ctrl-Space</tt>''': Grab the spot on or near the current frequency
 +
* '''<tt>Ctrl-DoubleClick</tt>''' on a spot: Delete the spot without the warning window
 +
* '''<tt>Alt-DoubleClick</tt>''' on a spot: Load the sub VFO with a spot frequency (if applicable)
 +
 +
==DX-Cluster Announcements==
 
* '''<tt>Ctrl-DoubleClick</tt>''' on a spot: Delete the spot without the warning window
 
* '''<tt>Ctrl-DoubleClick</tt>''' on a spot: Delete the spot without the warning window
 
* '''<tt>Alt-DoubleClick</tt>''' on a spot: Load the sub VFO with a spot frequency (if applicable)
 
* '''<tt>Alt-DoubleClick</tt>''' on a spot: Load the sub VFO with a spot frequency (if applicable)
Line 116: Line 137:
  
 
==Multi Operator==
 
==Multi Operator==
* '''<tt>Alt-Y</tt>''': Toggle current QSO from RUN to MULT in M/S category or from RUN1 to RUN2 in M/2 category and vice versa
+
* '''<tt>Alt-Y</tt>''': Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa.<p>If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2.  See [[Menu:Commands#Station_Type|Menu:  Commands | Station Type]].
* '''<tt>Ctrl-F3</tt>''': Toggle current QSO (like '''<tt>Alt-Y</tt>''')
+
* '''<tt>Ctrl-F3</tt>''': Toggle current QSO (same as '''<tt>Alt-Y</tt>''')
  
 
==SO2R==
 
==SO2R==
* '''<tt>AltGr-1</tt>'''...'''<tt>AltGr-8</tt>''': Select one of the eight SO2R scenarios
+
* <tt>'''AltGr-A'''</tt>, <tt>'''Ctrl-Alt-A'''</tt>: Listen to the primary radio with both ears
 +
* <tt>'''AltGr-T'''</tt>, <tt>'''Ctrl-Alt-T'''</tt>: Listen to the secondary radio with both ears
 +
* <tt>'''AltGr-S'''</tt>, <tt>'''Ctrl-Alt-S'''</tt>: Listen to both radios in stereo (toggle)
 +
* <tt>'''AltGr-L'''</tt>, <tt>'''Ctrl-Alt-L'''</tt>: Listen to the "other" radio with both ears during transmit (headphone "latch")
 +
* <tt>'''AltGr-R'''</tt>, <tt>'''Ctrl-Alt-R'''</tt>: Restore automatic control (advanced scenarios will control headphones, like $RESET)
 +
* <tt>'''AltGr-1'''</tt>...<tt>'''AltGr-8'''</tt>, <tt>'''Ctrl-Alt-1'''</tt>...<tt>'''Ctrl-Alt-8'''</tt>: Select one of the eight SO2R scenarios
  
 
==Partner Mode==
 
==Partner Mode==
* '''<tt>Alt-Enter</tt>''': Add call to partner window
+
* '''<tt>Alt-Enter</tt>''': Add the call current call to the partner window
* '''<tt>Alt-Space</tt>''': Grab 1st line from the partner window real time lines
+
* '''<tt>Alt-Space</tt>''': Grab the call in the topmost "real time" line of the partner window
* '''<tt>Alt-Backpace</tt>''': Clear the entire Partner window content
+
* '''<tt>Alt-Backpace</tt>''': Clear everything in the partner window
* '''<tt>Alt-1</tt>'''...'''<tt>Alt-9</tt>''': Grab nth call in partner window stack
+
* '''<tt>Alt-1</tt>'''...'''<tt>Alt-9</tt>''': Grab the ''n''th call from the partner window
* '''<tt>Ctrl-1</tt>'''...'''<tt>Ctrl-9</tt>''': Swap nth call in partner window with QSO entry line
+
* '''<tt>Ctrl-1</tt>'''...'''<tt>Ctrl-9</tt>''': Swap the ''n''th call in partner window with callsign in the logging window
 +
* '''<tt>DoubleClick</tt>''' on a callsign:  Grab the call from the partner window
 +
* '''<tt>Ctrl-DoubleClick</tt>''' on a callsign: Delete the call from the partner window
  
==Special Keys==
+
==Contest Recorder==
* '''<tt>Alt-L</tt>''':  [[WAEDC#Receiving_QTCs|open QTC RX window]] (to be used by EU stations)
+
* '''<tt>AltGr-Enter</tt>''':  Play QSO
* '''<tt>Ctrl-L</tt>''': [[WAEDC#Transmitting_QTCs|open QTC TX window]] (to be used by DX stations)
+
* '''<tt>AltGr-Up</tt>''':  Previous QSO
 +
* '''<tt>AltGr-Down</tt>''':  Next QSO
 +
* '''<tt>AltGr-Space</tt>''':  Play/Pause
 +
* '''<tt>AltGr-PgUp</tt>''':  Rewind 30s
 +
* '''<tt>AltGr-PgDn</tt>''':  FastForward 30s
 +
* '''<tt>AltGr-Left</tt>''':  Rewind 5s
 +
* '''<tt>AltGr-Right</tt>''': FastForward 5s
 +
* '''<tt>AltGr-E</tt>''':  Extract QSO
  
[[Main Page|Back to Main Page]]
+
Some keyboards do not have an <tt>AltGr</tt> key, so use <tt>Ctrl+Alt</tt> instead.
 +
 
 +
==Special Keys==
 +
* '''<tt>Alt-L</tt>''':  [[WAEDC#Receiving_QTCs|Open QTC RX window]]  (to be used by EU stations)
 +
* '''<tt>Ctrl-L</tt>''': [[WAEDC#Transmitting_QTCs|Open QTC TX window]] (to be used by DX stations)

Latest revision as of 01:38, 20 December 2016


Editing and moving around the QSO entry line

  • [Enter]: Log a contact
  • [Spacebar]: Move cursor between callsign entry and report fields
  • [Left arrow]: Move cursor one character to the left
  • [Right arrow]: Move cursor one character to the right
  • [Home]: Move cursor to the beginning of the field
  • [End]: Moves the cursor to the end of the field
  • [Backspace]: Delete the character located left of the cursor
  • [Tab] : Move cursor between sent RST and received number fields
  • [>]: Move cursor to next field in the main log.
  • [<]: Move cursor to previous field in the main log.
  • [Del]: Delete the character located under the cursor
  • [F11]: Clear all the fields of the current QSO, and puts the cursor into the callsign logging field
  • Alt-W: Clear QSO (like F11)
  • Alt-F8: Clear QSO (like F11)
  • Alt-F: Edit QSO date and time
  • Alt-N: Write a note regarding this QSO
  • Alt-Up arrow: Copy the previous QSO in the log
  • Ctrl-A: Like [Home]
  • Ctrl-B: Like [Left arrow]
  • Ctrl-D: Like [Del]
  • Ctrl-E: Like [End]
  • Ctrl-F: Like [Right arrow]
  • Ctrl-W: Clear the current field; if report field is cleared, initialise RST
  • Ctrl-K: Like [Shift-Del]
  • Ctrl-Z: Undo - restores edited QSO data to prior value (see Menu:Edit#Restore_QSO)
  • Ctrl-Left arrow: Like [Home]
  • Ctrl-Right arrow: Like [End]
  • Shift-Backspace: Delete all the characters left of the cursor
  • Shift-Del: Delete all characters under and right of the cursor

Movement in the log

Warning: Any movement in the log validates the QSO where the cursor was located before the movement!

  • [Up arrow]: Move one QSO up
  • [Down arrow]: Move one QSO down
  • [PgUp]: Move 10 QSOs up
  • [PgDn]: Move 10 QSOs down
  • Ctrl-Shift-G: Go to callsign (press again for next QSO with this callsign)
  • Ctrl-G: Go to a specific QSO number
    • To skip the dialog box prompt, just enter the QSO number into the callsign field, then Press Ctrl-G. To return to the end of the log, press Ctrl-G, [Spacebar]
  • Ctrl-G, [Home]: Go to first QSO in log
  • Ctrl-G, [End]: Go to last QSO in log
  • Ctrl-Home: Go to first QSO in log
  • Ctrl-End: Go to last QSO in log
  • Ctrl-PgDn: Go forward 12 hours in the log
  • Ctrl-PgUp: Go back 12 hours in the log

Message keys

  • [F1]: Play message #1. Normally, this message is the CQ
  • [F2]: Play message #2. Normally, this message is the report sent (full)
  • [F3]: Play message #3. Normally, this message is the serial number sent
  • [F4]: Play message #4. Normally, this message is your call
  • [F5]: Play message #5. Normally, this message is the logged callsign
  • [F6]: Play message #6. Normally, this message sends Call? or NR?
  • [F7]: Play message #7. Normally, this message sends "?" or "Again?"
  • [Insert]: Play the message defined for this key (CW/RTTY only) - normally, this message is the logged callsign the full sent report
  • [+]: Play the message defined for this key (CW/RTTY only) - normally, this message sends a TU, then your callsign and automatically logs the QSO. See also Remapping [+] when using a Notebook or Mini keyboard.
  • [Esc]: Stop the output message being sent
  • Alt-K: Toggle Keyboard mode
  • Alt-C: Send or modify additional messages
  • Alt-V: Change CW speed (opens "CW-Speed" dialog box)
  • Alt-F9: Decrease CW speed by 2 WPM
  • Alt-F10: Increase CW speed by 2 WPM
  • Shift-F1...Shift-F7: Record messages #1 to #7 (unless Operating | Shift binds to the second radio is enabled)
  • Shift-Insert: Record the message associated to the [Insert] key (unless Operating | Shift binds to the second radio is enabled). CW/RTTY only. For Phone, the F2 message is the Insert message.
  • Shift-+: Records the message associated to the [+] key (unless Operating | Shift binds to the second radio is enabled). CW/RTTY only. For Phone, the F3 message is the Plus message.
  • AltGr-F1...AltGr-F7: Record messages #1 to #7
  • AltGr-Insert: Record the message associated to the [Insert] key
  • AltGr-+: Records the message associated to the [+] key
  • Ctrl-Alt-F1...Ctrl-Alt-F7: Record messages #1 to #7
  • Ctrl-Alt-Insert: Record the message associated to the [Insert] key
  • Ctrl-Alt-+:Records the message associated to the [+] key
  • Ctrl-Tab: Toggle between Run and S&P mode and messages (CW/RTTY)
  • Ctrl-Shift-Tab: Toggle between Run and S&P mode and messages on the secondary radio

Open and Close Windows

  • [F8]: Open/Close N + 1 Window
  • [F9]: Open/Close Check call Window
  • [F10]: Open/Close Check Multipliers Window
  • [F12]: Open/Close Check Partials Window
  • Alt-A: Open/Close DX-Cluster Announcements Window
  • Alt-B: Open/Close Skeds Window
  • Alt-E: Take a sked
  • Alt-I: Open/Close Gab Window
  • Alt-M: Open/Close Mult Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-R: Open/Close Rate Window
  • Alt-S: Open/Close Summary
  • Alt-X: Open Extra Data Files Window
  • Alt-Z: Open/Close Worked zones Window
  • Ctrl-F9: Open/Close Statistics Window
  • Shift-F10: Reverse Multiplier Check - Opens the Search for Worked Multipliers Window

Radio Control

  • [-]: Split frequency - enter QSX frequency here (e.g. 7239). "+1" will set the RX VFO +1 kHz from TX VFO. "0" turns split frequency mode off.
  • [*]: Switch active radio. This only works with the [*] key on the numeric keypad. See also Remapping [*] when using a Notebook or Mini keyboard.
  • Alt-: : Switch active radio
  • Alt-F1: QSY band down (20 => 40 => ...)
  • Alt-F2: QSY band up (20 => 15 => ...)
  • Alt-F4: QSY back to run frequency
  • Alt-F5: Set run frequency
  • Ctrl-S: Swap the frequency on both radios (SO2R)
  • Ctrl-T: Tune the transmitter (on CW, max 30 seconds)
  • Ctrl-F1 and Ctrl-F2: Switch mode (when the contest permits and mode=MIXED or ALL)

Packet

  • Alt-A: Open/Close DX-Cluster Announcements Window
  • Alt-O: Open/Close DX-Cluster Monitor Window
  • Alt-T: Talk to DX-Cluster
  • Alt-F3: Spot

Band Map

  • Ctrl-Enter: Insert spot into Band Map
  • Ctrl-Del: Delete spot on current frequency in the active Band Map
  • Ctrl-J: Insert spot into Band Map
  • Ctrl-Up arrow: Grab the first upper spot in the active Band Map (in frequency regarding the active radio)
  • Ctrl-Shift-Up arrow: Grab the first upper spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-pointer
  • Ctrl-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio)
  • Ctrl-Shift-Down arrow: Grab the first lower spot in the active bandmap (in frequency regarding the active radio), even if it is a 0-point station
  • Ctrl-Space: Grab the spot on or near the current frequency
  • Ctrl-DoubleClick on a spot: Delete the spot without the warning window
  • Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)

DX-Cluster Announcements

  • Ctrl-DoubleClick on a spot: Delete the spot without the warning window
  • Alt-DoubleClick on a spot: Load the sub VFO with a spot frequency (if applicable)

Networking

  • Alt-D: Pass a station
  • Alt-G: Send a gab
  • Alt-I: Open/Close Gab Window
  • Alt-J: Display status of all stations in the network

Multi Operator

  • Alt-Y: Toggle current QSO's station type from RUN (R1) to MULT (M) in the M/S category, or from RUN1 (R1) to RUN2 (R2) in M/2 category, and vice versa.

    If the cursor is on the logging line rather than a previously logged QSO when you press this key, the station type is changed for all new QSOs logged on that computer, i.e. it is equivalent to entering the text commands RUN/MULT or RUN1/RUN2. See Menu: Commands | Station Type.

  • Ctrl-F3: Toggle current QSO (same as Alt-Y)

SO2R

  • AltGr-A, Ctrl-Alt-A: Listen to the primary radio with both ears
  • AltGr-T, Ctrl-Alt-T: Listen to the secondary radio with both ears
  • AltGr-S, Ctrl-Alt-S: Listen to both radios in stereo (toggle)
  • AltGr-L, Ctrl-Alt-L: Listen to the "other" radio with both ears during transmit (headphone "latch")
  • AltGr-R, Ctrl-Alt-R: Restore automatic control (advanced scenarios will control headphones, like $RESET)
  • AltGr-1...AltGr-8, Ctrl-Alt-1...Ctrl-Alt-8: Select one of the eight SO2R scenarios

Partner Mode

  • Alt-Enter: Add the call current call to the partner window
  • Alt-Space: Grab the call in the topmost "real time" line of the partner window
  • Alt-Backpace: Clear everything in the partner window
  • Alt-1...Alt-9: Grab the nth call from the partner window
  • Ctrl-1...Ctrl-9: Swap the nth call in partner window with callsign in the logging window
  • DoubleClick on a callsign: Grab the call from the partner window
  • Ctrl-DoubleClick on a callsign: Delete the call from the partner window

Contest Recorder

  • AltGr-Enter: Play QSO
  • AltGr-Up: Previous QSO
  • AltGr-Down: Next QSO
  • AltGr-Space: Play/Pause
  • AltGr-PgUp: Rewind 30s
  • AltGr-PgDn: FastForward 30s
  • AltGr-Left: Rewind 5s
  • AltGr-Right: FastForward 5s
  • AltGr-E: Extract QSO

Some keyboards do not have an AltGr key, so use Ctrl+Alt instead.

Special Keys